|
JEEP
POLYURETHANE BUSHINGS
Body
Cab Mount Polyurethane Bushings
 Replacing
distorted OEM rubber body/cab mount bushings with polyurethane
will help eliminate body roll and give your vehicle
a smoother, longer lasting ride and better body fit.
We highly recommend these bushings for vehicles that
have been raised with a body lift. When the body is
raised it puts added stress onto the body bushings.
Factory rubber bushings are much more prone to give
out due to this increased leverage.
|
Body
Cab Mount Polyurethane Bushing Kits |
|
Year |
Application |
Pricing |
|
1955
- 75 |
CJ-5,
CJ-7, CJ3A, MB & M38A1 Military |
|
|
1976
- 79 |
CJ-5,
CJ-7, CJ3A, MB & M38A1 Military |
|
|
1980
- 86 |
CJ-5,
CJ-7, CJ3A, MB & M38A1 Military |
|
|
1981
- 86 |
CJ-8 |
|
|
1987
- 96 |
YJ
Wrangler |
|
|
1997
- 06 |
TJ
Wrangler |
|
Body
Lifts - Polyurethane
 Most
body lifts are hard polyresin pucks that are used in
combination with your factory mounts. There's nothing
wrong with that, but sometimes your mounts are worn
out AND you want a body lift. You may as well do it
with one kit. These Daystar polyurethane body lift kits
replace the factory mounts and give you an inch of lift.
No stacking and no spacers. If you want a regular Jeep
body lift, then click
here.
|
Body
Lifts -- 1" Polyurethane
|
|
Year
|
Application
|
Pricing
|
|
1980
- 86
|
CJ-5,
CJ-7; 1" Body Lift Kit |
|
|
1976
- 79
|
CJ-5,
CJ-7; 1" Body Lift Kit |
|
|
1980
- 86
|
CJ-8;
1" Body Lift Kit |
|
|
1987
- 96
|
YJ
Wrangler ; 1" Body Lift Kit |
|
|
1997
- 06
|
TJ
Wrangler ; 1" Body Lift Kit |
|
Control Arm Polyurethane
Bushings
Camber is the inward or outward
tilt of the front tires as viewed from the front. Inward
tilt is negative, outward tilt is positive. Camber is
used to distribute load across the entire  tread.
Improper camber makes the tire wear on one edge, and
causes the vehicle to pull to the side that has the
most positive camber. Control arm bushings can help
correct your camberangle--but usually up to only 2 degrees.
For more adjustment you can purchase adjustable cam
bolts and new brackets. Call for details and applications.
These control arm bushings DO NOT included the steel
outer shell. You will have to keep the factory outer
shells from your OE bushings and re-use them. See
footnote #247.
|
Control
Arm Polyurethane Bushings
|
|
Year
|
Application |
Pricing
|
|
1984
- 01
|
XJ
Cherokee, Wagoneer, Comanche (downsize) 2wd/4wd |
|
|
1993
- 98
|
ZJ
Grand Cherokee (Front Only) |
|
|
1993
- 98
|
ZJ
Grand Cherokee (Rear Only) |
|
|
1997
- 06
|
TJ
Wrangler (Front Only) |
|
|
1997
- 06
|
TJ
Wrangler (Rear Only) |
|
Frame
Shackle Bushings
 Rubber
factory bushings get damaged by grease, weather
and general driving conditions. When that occurs
they can bind and loose their effectiveness. The
easy and inexpensive solution to this common problem
is a new set of polyurethane frame shackle bushings. |
|
|
Frame
Shackle Polyurethane Bushings
|
|
Year
|
Application
|
Pricing
|
|
1946
- 75
|
MB
& CJ's Front or Rear Frame Shackle Bushings |
|
|
1976
- 86
|
CJ's
Front Frame Shackle Bushings |
|
|
1976
- 86
|
CJ's
Rear Frame Shackle Bushings |
|
|
1984
- 01
|
XJ
Cherokee, Wagoneer, Comanche (downsize) |
|
|
1987
- 96
|
YJ
Wrangler Front or Rear Frame Shackle Bushings |
|
Greasable
Bolt & Bushing Kits
 For
a leaf spring suspension to operate smoothly the springs
and shackles must move freely without binding. To eliminate
this problem we recommend Daystar's “Zero-Bind”
technology. Daystar Dura-Thane™ Greasable bolt/bushing
kits come complete with gun drilled, hardened bolts,
grease grooved Dura-Thane™ bushings and nylock
nuts. Zerk fittings are placed for easy access and can
be filled with any standard grease gun. Replacing your
stock spring or shackle bushings with one of these kits
will help to eliminate annoying squeaks and the bind.
|
Shackle
Bushings and Bolts
|
|
Year
|
Application
|
Pricing
|
|
1946
- 75
|
M38
& CJ for front OR rear (1 pair) (aftermarket
shackles only) greasable bolt & bushing kit |
|
|
1976
- 86
|
CJ's
(Front Only) greasable bolt & bushing kit |
|
|
1976
- 86
|
CJ's
(Rear Only) greasable bolt & bushing kit |
|
|
1984
- 01
|
XJ
Cherokee (rear only) greasable bolt & bushing
kit |
|
|
1987
- 96
|
YJ
Wrangler Front or Rear (1 pair) greasable bolt &
bushing kit |
|
|
Spring
Eye Bushings and Bolts
|
|
Year
|
Application
|
Pricing
|
|
1946
- 75
|
M38
& CJ (includes front and rear) greasable bolt
& bushing kit |
|
|
1976
- 86
|
CJ's
(includes front & rear) greasable bolt &
bushing kit |
|
|
1984
- 01
|
XJ
Cherokee (rear only) greasable bolt & bushing
kit |
|
|
1987
- 96
|
YJ
Wrangler (includes front & rear) greasable bolt
& bushing kit |
|
Spring
& Shackle Bushings
 Rubber
factory bushings get damaged by grease, weather and
general driving conditions. When that occurs they can
bind and loose their effectiveness. The easy and inexpensive
solution to this common problem is a new set of polyurethane
spring and frame shackle bushings.
| Front |
|
Year |
Application |
Pricing |
|
1946
- 75 |
CJ-5,
CJ-7, CJ-3A, MB, & M38A1 Military - spring &
shackle bushings |
|
|
1976
- 86 |
CJ-5,
CJ-7, CJ-8 - spring & shackle bushings |
|
|
1987
- 96 |
YJ
Wrangler - spring & shackle bushings |
|
|
Rear |
|
1946
- 75 |
CJ-5,
CJ-7, CJ-3A, MB, & M38A1 Military - spring &
shackle bushings |
|
|
1976
- 86 |
CJ-5,
CJ-7, CJ-8 - spring & shackle bushings |
|
|
1984
- 01 |
XJ
Cherokee, Wagoneer, Comanche (downsize) - spring
& shackle bushings |
|
|
1987
- 96 |
YJ
Wrangler - spring & shackle bushings |
|
Super
Kits
 A
great way to tighten up the performance of your vehicle
is to purchase and install a Daystar polyurethane Super
Kit. Daystar Super Kits are a complete master set of
all polyurethane components available for your vehicle.
(kits below are not necessarily the same as the photo--pictured
in the photo is the YJ Wrangler super kit).
|
Year
|
Application
|
Pricing
|
|
1955
- 75
|
CJ-5,
CJ-7 - super kit |
|
|
1976
- 79
|
CJ-5,
CJ-7 |
|
|
1980
- 86
|
CJ-5,
CJ-7 |
|
|
1976
- 86
|
CJ-8 |
|
|
1987
- 96
|
YJ
Wrangler with 15/16" sway bar |
|
|
1987
- 96
|
YJ
Wrangler with 1-1/8" sway bar |
|
|
1997
- 06
|
TJ
Wrangler with 30mm sway bar |
|
|
1993
- 98
|
ZJ
Grand Cherokee |
|
|
1984
- 01
|
XJ
Cherokee 2wd/4wd with 23mm sway bar |
|
|
1984
- 01
|
XJ
Cherokee 2wd/4wd with 24mm sway bar |
|
|
1984
- 01
|
XJ
Cherokee 2wd/4wd with 25mm sway bar |
|
|
1984
- 01
|
XJ
Cherokee 2wd/4wd with 28mm sway bar |
|
Sway
Bar Bushings
 The
sway bar helps reduce the body roll when cornering by
transferring a torsional force between the wheels of
the same axle. The factory rubber bushings get soft
and worn out over time and that hurts the ability of
the sway bar to do it's job. Replacement polyurethane
bushings--that withstand corrosion from extreme temperatures
and chemicals--will help your sway bar perform it's
proper function again.
|
4WD
Vehicles — Front Sway Bar Bushing Kits
|
|
Year
|
Application |
Pricing
|
|
1976
- 86
|
CJ's
With 15/16" Sway Bar |
|
|
1984
- 01
|
XJ
Cherokee, Wagoneer, Comanche (downsize) with 23mm |
|
|
1984
- 01
|
XJ
Cherokee, Wagoneer, Comanche (downsize) with 24mm |
|
|
1984
- 01
|
XJ
Cherokee, Wagoneer, Comanche (downsize) with 25mm |
|
|
1984
- 01
|
XJ
Cherokee, Wagoneer, Comanche (downsize) with 28mm |
|
|
1984
- 01
|
XJ
Cherokee Rear Sway Bar |
|
|
1993
- 98
|
Grand
Cherokee Front |
|
|
1993
- 98
|
Grand
Cherokee Rear |
|
|
1987
- 96
|
Wrangler
YJ with 15/16" Sway Bar |
|
|
1987
- 96
|
Wrangler
YJ With 1-1/8" Sway Bar |
|
|
1997
- 06
|
Wrangler
TJ (front) with 30mm Sway Bar |
|
|
1997
- 06
|
Wrangler
TJ (rear) with 15mm Sway Bar |
|
|
2002
- 07
|
Liberty
(front) Sway Bar |
|
Tie
Rod Boots
 |
Year
|
Application |
Pricing
|
|
1946
- 06
|
All
Jeeps |
|
Track
Bar Bushings
 |
Year |
Application |
Pricing |
1984
- 01 |
XJ
Cherokee (front) |
|
1993
- 98 |
ZJ
Grand Cherokee (ff) |
|
1993
- 98 |
ZJ
Grand Cherokee (rr) |
|
1997
- 06 |
TJ
Wrangler (front) |
|
1997
- 06 |
TJ
Wrangler (rear) |
|
| |
Transmission
& Motor Mounts
|
Year |
Application |
Pricing |
|
Transmission
Mounts |
|
1966
- 90 |
CJ
& YJ Wrangler |
|
|
1997
- 06 |
TJ
Wrangler |
|
|
1984
- 01 |
XJ
Cherokee 2.5L Auto Only |
|
|
1984-
01 |
XJ
Cherokee 4.0L Only (except peugeot tranmission) |
|
|
Motor
Mounts |
|
1987
- 06 |
YJ,
TJ Wrangler 4.0L 1" taller for bodylift applications |
|
|
1987
- 96 |
YJ
Wrangler 4.0L |
|
|
1997
- 06 |
TJ
Wrangler 4.0L |
|
|
1984
- 01 |
XJ
Cherokee 4.0L |
|
|
1984
- 93 |
MJ
Commanche 4.0L |
|
|
1976
- 86 |
CJ
with 6-cylinder 258 cubic inches (2 per set) |
|
|
1972
- 92 |
All
AMC made v-8 engines |
|
|
