2007 Avalanche K1500 4WD
2" Leveling Lift Kit
This kit will level out your Avalanche. The Tuff Country kit includes steel spacers, the Skyjacker kit includes aluminum spacers. Both very cost effective and efficient ways to level out your Avalanche.
2" Skyjacker Lift Kit |
 |
2" Tuff Country Kit |
|
2007 Avalanche K1500 4WD
4" Suspension Lift Kit
This kit’s features and benefits are: A one-piece reinforced sub-frame, front differential drop brackets correct pinion angle for minimized drive line vibration, maintains factory location of rack and pinion, preserves OE geometry for easy alignment, minimal bump steer and optional ride & handling, high-clearance aft braces for
added strength while maximizing ground clearance, No exhaust modification, allows for use of stock wheels, fits up to a 315/70/17 tire, new extended length rear progressive rate coil springs maintain factory ride quality, and allows for reuse of the OE front skid-plate. (Note: Fitment of the maximum tire diameter may require trimming or modification to provide proper clearance. Shocks are SOLD SEPERATELY!)
4" Rancho Lift Kit |
|
01-03 Avalanche K1500 4WD
4"-6" Suspension Lift Kit
This kit has a simple bolt-on installation. One piece sub-frame gives increased strength and eliminates 
squeaks and rattles in front end. It also comes with new heavy duty steering knuckles,front differential drop brackets, lateral compression struts, torsion bar drop brackets, rear track bar bracket, coil spring spacers, and rear sway bar end links. All bushing and hardware to install these parts are also included. This kit includes shock relocating brackets. (Note: wheels require 4.5” backspacing. Shocks NOT REQUIRED.)
4" Tuff Country Lift Kit 426 |
|
6" Tuff Country Lift Kit 426 |
|
01-03 Avalanche K2500 4WD
6" Suspension Lift Kit
This kit has a simple bolt-on installation. One piece sub-frame gives increased strength and eliminates squeaks and rattles in front end. It also comes with new heavy duty steering knuckles, front differential drop brackets, lateral compression struts, torsion bar drop brackets, rear blocks and U-bolts. All bushing and hardware to install these parts are also included.
00-06 Avalanche K1500 4WD 6-Lug
6" Suspension Lift Kit
These 6 lug vehicles have rear coil spring five link suspension. The design of this RCD 6"kit allows you to retain the stock drive shaft. You will be able to run 33 x 12.5 tires on 16x8 wheels with this kit, but you will need wheels with max back spacing of 4.5". (Note: This kit is not recommended for vehicles with full time 4WD or “stabilitrak”. Select proper kit for vehicles with air ride suspension. Requires 4.5” backspaced wheels.)
6" RCD Non-Air Ride Lift Kit |
|
6" RCD Air Ride Lift Kit |
|
01-06 Avalanche K2500 4WD 8-Lug
6" Suspension Lift Kit
RCD’s system comes with CNC machined 
replacement cast iron steering knuckles, and fully machined T-6 Billet Aluminum axle spacers maintain proper axle lengths. Heavy Duty two piece lower sub-frame assembly and a polished stainless steel “Twin-Link” anti-compression struts insure structural strength and durability. CNC machined, zinc plated billet steel “Super-Flex” sway bar end links feature an upper ball joint assembly for smooth operation, optimizing sway bar geometry and function. (Note: Requires 4.5” backspaced wheels.)
6" RCD Lift Kit |
|
