09-10 1/2 Ton Ram 4WD
2"
Suspension Leveling Kit
Tuff Country found a cheap, or as we like to say, inexpensive way to level your Dodge Ram 1500 4WD. These Dodge trucks come from the factory nose down. Adding this 2" kit will level the front end with the rear to even out your ride.
09-10 2" Tuff Country Leveling Kits
|
|
2009-2010 Ram 1500 4WD
2"
Strut Extension Leveling Kit
Leveling a Dodge Ram is an excellent way to achieve that "Ram Tough" look. ReadyLift® leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our innovative Smart Strut Technology mounts on top of the strut, unlike urethane spacer kits that compress the spring and deteriorate over time. In order to prevent premature CV joint wear or damage, ReadyLift® designed this leveling kit specifically to prevent any premature wear and tear on CV joints by developing a modest lift height that levels the truck without over-extending the suspension or drivetrain. And 2.0" is the proper amount to LEVEL the 2009 Dodge Ram. Any more of a lift than 2.0" and the truck will sit nose high.
The NEW 66-1030 Dodge Ram 1500 kit features a pair of CNC-machined aircraft-grade 6061 T-6 billet aluminum strut extensions designed specifically for the new Dodge Ram trucks. These strong strut extensions provides 2.0" of lift from stock which is what is required to achieve a level stance. This lift also allows up to 35" tall off road tires without concern for clearance issues. ReadyLift® strut extensions will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed!
Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLift® can be installed one to two hours and costs less than the price of a single custom wheel.
ReadyLift Lifetime Warranty Included! All ReadyLift® products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals.
|
|
| Guaranteed Features: |
- Keeps your factory ride
- Will never wear, break or fail
- Toughest finish
- Safest way to level lift
|
2" Leveling Kit |
 |
2009-2010 Ram 1500 (New Body) 4WD
2.5"F/1.5"R SST Hybrid Lift Kit
Lifting a Ram both in front and in the rear is an excellent way to achieve that "Ram Tough" look. ReadyLift® SST Hybrid Lift Kits are the fastest, safest, least expensive way to mildly lift your vehicle at both ends. ReadyLift® SST Hybrid Lift Kits go one step beyond our popular front leveling kits by providing the vehicle owner with the ability to lift the truck in the front and rear while maintaining a slight rake for towing or hauling. The unique design of the 2009 Dodge Ram 1500 4WD suspension allows our innovative Smart Strut Technology mounts to fit right on top of both the front and rear struts. Unlike urethane spacer kits that compress the springs and deteriorate over time, the ReadyLift® SST Mild Lift Kit for the 2009 Dodge Ram 1500 4WD feature all-steel construction designed to last the life of the vehicle.
The NEW 69-1030 Dodge Ram 1500 lift kit features a pair of steel construction front strut extensions and a pair of rear suspension strut extensions also constructed from strong, durable steel. This kit is designed specifically for the new Dodge Ram trucks. These strong strut extensions provides 2.5" of lift from stock in the front and 1.5" of lift in the rear. This creates a mild lifted stance slightly beyond level and includes a slight rake which is ideal for towing and hauling. This lift also allows the 2009 Dodge truck owner to install up to 35" tall off road tires without concern for clearance issues. ReadyLift® strut extensions will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed!
The 69-1030 kit also includes droop limiting bump stops and extensions designed to prevent the operator from over-extending the droop cycle that can occur during aggressive driving.
Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLift® can be installed in about two-three hours.
ReadyLift® Lifetime Warranty Included! All ReadyLift® products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals.
|
|
| Guaranteed Features: |
- Keeps your factory ride
- Will never wear, break or fail
- Toughest finish
- Safest way to lift
|
2.5"Front/1.5" Rear Lift Kit |
|
2009-2010 1/2 Ton Ram 4WD
2.5"
Leveling Lift Kit
No Metal-On-Metal Contact - Daystar uses Polyurethane material in its Leveling Kits for a reason: It's an insulator. It absorbs the Noise, Vibration, and Harmonics (NVH) that come from the suspension and avoids transmitting them to the passenger compartment. All competitors use steel or aluminum in their Leveling Kits. If you were to take apart any factory suspension, you are going to find rubber, polyurethane, and often both in a typical suspension. These pieces are there for a reason; they absorb the NVH. Sure, steel makes a great hammer, but would you want to ride on it?
2009 1/2 Ton Ram 4WD
4"-6"
Suspension Lift Kit
An all-new factory coil spring / 4-link rear suspension mated to Dodge’s existing coilover strut front suspension has resulted in exceptionally good ride quality and control. With Superlift’s 4” and 6” lift systems, this “best in class” driveability remains intact, or arguably, it’s actually improved upon. Front lift is via your choice of strut towers (less expensive and easier to install), or Bilstein replacement strut cylinders, which noticeably improve handling at higher speeds.
Features:
Front lift choices for new strut towers (no strut disassembly required), or replacement Superide Select SS series gas monotube strut bodies by Bilstein.
Replacement knuckles yield best possible alignment specs. Front track width is not increased and factory turning radius is retained.
Front lower control arm cross members laser cut from 3/16" material.
Belly pan, constructed of 1/4" material, connects cross members and protects differential.
Retains front andti-sway bar link extensions factory "service for life" links.
New Superide Dual Rate rear coil springs provide ideal ride, handling and load carrying capability.
New bracketry relocates factory rear 4-link points, anti-sway bar links, brake lines and track bar.
New longer rear compression travel-stop brackets.
Installs easily with only slight trimming and no exhaust or driveshaft modifications.
compatible with Dodge's electronic stability program.
2009-2010 Ram 1500 4WD
4"-6" Suspension Lift Kit
Dodge may have redesigned the 1500 Rams, but Skyjacker has released two suspension lift kits that redefine this all new setup. The 4 & 6" kits include CNC Machined steering knuckles, front and rear crossmembers, --piece differential skid plate, 4-link relocation brackets and replacement variable rate Softride rear coil springs.
- CNC machined steering knuckles
- Front and Rear steel crossmembers
- Powder coated differential skid plate
- Variable rate softride coil springs
- Rack-and-Pinion steering assembly left in OE position
- Maintains OEM steering geometry
- Improved ride and softride coils
- Protection for differential housing
- Clearance for Larger Tires and Wheels
|
|
4" Lift Kit |
|
6" Lift Kit |
|
2009-2010 Ram 1500 4WD
6" Suspension Lift Kit
The right lift at the right price, right now! These trucks sport a new multi-link rear coil spring suspension. Pro Comp is proud to be the first manufacturer to have 6" performance suspension systems available for these hot trucks.
Pro Comp's engineering team designed 2 new systems that maximize the handling and performance benefits of the new multi-link system without compromising the factory Electronic stability program (ESP). The results are nothing short of amazing as these are the smoothest riding lift systems ever engineered for the Dodge 1500 truck.
The 6" system feature high strength extended steering knuckles and one-piece cross members that install easily and maintain proper CV axle angles. New precision engineered height adjustable spacer and rear control arm bracket system assures an OE quality ride and allows for added personalization of vehicle stance.
Stage II systems feature MX2.75C Motorsport Series coil over front shocks and MX6 mono-tube 6 position adjustable rear shocks for optimum on and off road performance and handling. Stage I systems feature front strut spacers and ES9000 rear shock absorbers.
Lift allows the use of up to 37" x 12.5" tires on 18"x9" or 20"x9" wheel with 5" backspacing.
|
Stage I w/ front strut spacers and rear ES9000 shocks |
|
Stage II w/ MX2.75C front coil overs and rear MX6 shocks |
|
