94-02 3/4 and 1Ton Ram 4WD
5"
Suspension Lift Kit
This kit includes upper and lower control arms to maintain proper alignment, upper coil spring spacers to retain your factory ride, sway bar drops and a new track bar relocating bracket. This kit will not fit Off-Road models. TUF 37755 U-bolts are required for vehicles with factory contact overloads (trucks with 3" wide rear springs)
5" Tuff Country Suspension Lift Kit |
 |
TUF 37755 U-bolts |
|
94-02 3/4 and 1 Ton 4WD
7"
Suspension Lift Kit
Skyjacker 7" system has put a lot into this long arm lift system for this truck. This kit requires no welding and will clear 38s with no drive shaft or other modifications necessary for installation. Jack-It has put together three kits using mostly Skyjacker components for this vehicle. (Note: 6 speed transmission models will require modifications to transmission brackets. Will only fit models with 6 bolts transfer case to transmission.)
Standard kit includes (2) softride front coil springs, (6) Skyjacker shocks, double flex upper and lower control arms, support brackets for the lower control arms that connect into the new transmission crossmember, re-indexing rotates the transfer case down for proper front drive shaft angle, adjustable track bar with bracket, drop pitman arm, bump stops, dual front shock kit, sway bar drops, lower link skid plates, transmission/skid plate, and stainless steel brake hoses. This standard kit will double block the rear of the track with a new one on top of your stock block.
The deluxe kit (shown above) includes everything in the standard kit plus rear leaf springs with Skyjacker shocks.
The premium kit includes everything in the deluxe kit replacing the Skyjacker shocks with Bilstein 5100s.
1994-2002 7" Suspension Lift Kits
|
|
