1966-1979 Ford F150 Suspension Lift Kits - jackit.com


66-79 1"-9" Ford F150 Jack-It Lift Kits	66-79 2"-4" Ford F150 Cage Lift Kits Optional Accessories

66-79 Ford F150 4WD
1.5"-9" Suspension Lift Kit

These kits were designed to give superior performance from highway handling and towing as well as excellent off road stability. This is achieved by using a combination of coil springs, radius arm drop brackets with C bushings, adjustable drag link, and a track bar. Coil springs are pre-settled to reduce height changes. C bushings and a radius arm drop bracket will correct the negative caster degree angle, which is one of the biggest problems with the F150. An adjustable drag link will corect several problems that increased drag link angles can cause. A track bar will prevent "Dog Track", this is where on one side of the truck, the tires will stick out further than on the other side. These are the most complete kits on the market. Purchase a deluxe or premium to give your truck all the extras it needs for a superior ride.

STANDARD PACKAGES

New front coil springs
Polyurethane "C" bushings
Front and rear shocks
Rear add-a-leafs (1.5-4" & 9" kits)
Rear blocks (6" and 9" kits)
Drop pitman arm (76-79 6"-9" & 78-79 4" only)
Radius arm brackets (not 1.5"-4" kit)
Track bar extension (4" kit only)
Adjustable track bar (6"-9" kits only)
Stainless steel brake lines (6"-9" kits only)
T-style tie rod (76-77 6" & 9" kits only)
Rear U-bolts

DELUXE PACKAGES

All standard package items plus:

(1) Steering stabilizer
Poly tie rod boots
Poly radius arm bushings
Poly track bar bushings

PREMIUM PACKAGES

All deluxe package items plus:

Rear leaf springs (3.5"-9" only)
Rear springs eyelet bolt kit
Rear shackle bushings
Adjustable track bar
Stainless steel brake lines (3.5"-9" only)
Radius arm drop brackets (3.5"-4" kit)
Adjustable drag link

	66-72	73-75	76-77	78-79
1.5"-2" Lift Kit	73 73 73	73 73 73	22, 73 22, 73 22, 73	22, 73 22, 73 22, 73
3.5"-4" Lift Kit	73, 74 73, 74 73, 74	73, 74 73, 74 59, 73, 74	73 73 59, 73	22, 73 22, 73 22, 59, 73
6" Lift Kit	73, 74 73, 74	73, 74 73, 74 73, 74	70, 73 70, 73 70, 73	22, 70, 73 22, 70, 73 22, 70, 73
9" Lift Kit	—	—	20, 73 20, 73 20, 73	20, 22, 73 20, 22, 73 20, 22, 73



The rear tire is over 4' in the air with the other three still on the ground! OH SNAP!

66-79 Ford F150 4WD
2"-4" Suspension Lift Kit

This kit raises the front of the vehicle 2" or 4" with progressive rate coil springs for excellent ride quality to provide room for larger tires while increasing ride quality and suspension performance. (Note: 76/77 will need converted to "T" style linkage in order to use the drop pitman arm provided. Some vehicles may need the rear upper shock mount converted to an eye mount.)

This package includes:

2 progressive rate coil springs
Pair of rear add-a-leafs
Drop pitman arm (fits 66-75 only)
New taller long travel front shock mounts
4 new CAGE Nitrogen pressurized, velocity, sensitive, dual tube shocks
New 14 piece bushing set for proper castor alignment

2" Cage Lift Kit
4" Cage Lift Kit

Extended Long Travel Radius Arms: (Installation guidelines) Longer than stock radius arms that completely replace the suspension travel limiting effects of the stock radius arms. Completely new construction arms are built from 2" diameter 5/16" wall DOM tubing and 1/4" plate steel for excellent durability. Radius arms are designed for extra turning clearance for large tires. Additional bushings built into the design for increased suspensiont ravel as well as increased articulation by properly dissipating "axle radial twist". Longer than stock design greatly increases ride quality. Welding and drilling required. Read the Performance and Technical overview.

Dual Front Shock Mounts fit 66-79 Broncos/F150s. Increase suspension travel and both on and offroad stability with the addition of dual shock mounts. By raising the upper shock mount location we are able to get a much longer shock into the suspension equation. A longer shock allows for the potential of more total suspension travel. Combined with our high travel performance coil springs and our tubular radius arms these can turn a standard rough riding vehicle into high performance smooth riding one. Unique design allows them to be adjustable so they work with stock or body lifted vehicles as well as any ride height from lowered to sky high lifted. Fits 66-79 Ford Bronco, F100 and F150 vehicles. Product is powder coated silver.

Installation and Technical Info: Remove the stock stud type shock mounts that limit the suspension travel and replace them with CAGE tubular dual mounts. On 3.5" 66-77 Broncos and 2" full size models fits 12" travel shock (CAGE #1014) and on 5.5" 66-77 Broncos and 4" full size models fits 14" travel shock (CAGE #1015). Dual shocks allow the shocks to fun cooler, work half as hard as a single shock, provide increased stability in off camber situations and while cornering a must have option for trail or street vehicles. Some inner fenderwell trimming required on full size models. Light welding, cutting, and drilling required.

Dual Rear Shock Mounts fit 66-77 Broncos. By placing the rear shocks on the front side of the rear axle, keeping them on the outside of the leaf sprins and orienting their position into an "A" shape (lower shock mojnts are top rear and bottom front of axle) provides many benefits: increased suspension performance, overall vehicle stability, suspension travel and axle wrap dampening. They are simple to install but welding and drilling are required. Some sheet metal trimming is required but with a 2" body lift installed on the Bronco cutting into the interior of the vehicle is not required.