|
1997-2006 TJ WRANGLER SUSPENSION LIFT KITS
97-06 TJ/Rubicon Wrangler 4WD
7"
X Factor Plus Long Arm System
This Rock Krawler kit features their revolutionary independent 3 link front end with track bar and a triangulated 4 link rear end that allows for removal of hte rear track bar. The 3 link front end with track bar is hte very same system used by professional rock crawlers today and is an awesome articulating front end design for conventional steering. Their modular skid plate design actually clam shells the frame top and bottom with no side drilling required. This adds structure to that frame. With the 3 piece construction; servicing of the driveline is still easy and does notinvolve any suspension modifications. The frame rail members can be bolted in or welded on and for added rear axle structure a weld in cradle can be substituted for the bolt in differential plate. Their high clearance lower control arms are made out of 2" solid stock and use 1" shank Monster Bushing sjoint at the end of the frame connection and a 1" shank Krawler Joint with a 65,000 pound radial load capacity at the axle connection. This kit is backed by Rock Krawler's abuse proof lifetime guarantee on all had parts.
- Excellent highway ride and handling.
- High clearance lower control arms
- Revolutionary independent three link front end for awesome flex and control
- Skid plate mount design that adds structure to the frame, provides a 1" gain in ground clearance, has a smooth bottom and is made from 1/4" thick steel.
- Weld on rear cradle for greater rear axle strength.
- Massive 2" solid control arms.
- RTI 1400+ on a 20 degree ramp.
- Allows for 37" tires.
- Limited Lifetime warranty.
- Upgradeable to any of Rock Krawler's coil over products.
|
4 linear coil springs, 4 high misalignment / double-adjustable lower long arms made from 2.00" solid stock, skid plate and skid plate mounting brackets made from 1/4 thick laser cut steel, 1 adjustable front upper torque arm made from solid stock, high misalignment / adjustable front track bar made from solid stock, front track bar relocation bracket made from 1/4" thick / laser cut steel, rear upper triangulated 4 link arms made from solid stock, rear triangulated 4 link mounting cradle / axle truss made from 1/4" thick laser cut steel, extended stainless steel brake lines, front adjustable sway bar disconnects, extended rear sway bar links, hardware and detailed instructions. |
97-02 7" Long Arm System |
 |
03-06 7" Long Arm System |
|
97-06 TJ/Rubicon Wrangler 4WD
7"
X Factor Plus Long Arm Stretch System
These systems feature Rock Krawler's revolutionary independent 3 link front end with track bar and a triangulated 4 link rear end that allows for removal of the rear track bar. The 3 link front end with track bar is the very same system used by professional rock crawlers today and is an awesome articulating front end design for conventional steering. Coupling this great front end geometry with adjustable coil over racing shocks placed in a fashion that gives improved stability can only make you say WOW! The triangulated 4 Link members can be purchased as long or short rear upper arms, so you do not have to replace your cat back exhaust. Rock Krawler's modular skid plate design actually clam shells the frame top and bottom with no side drilling required. This adds structure to that frame. With the 3 piece construction; servicing of the driveline is still easy and does not involve any suspension modifications. The frame rail members can be bolted in or welded on and for added rear axle structure a weld in cradle can be substituted for the bolt in differential plate free of charge. Our high clearance lower control arms are made of 2” solid stock and use 1” shank Monster Bushing joint at the frame connection and 1” shank Krawler Joints with a 65,000 pound radial load capacity at the axle connection. Rock Krawler backs this kit with their abuse proof lifetime guarantee on all hard parts.
- Excellent highway ride and handling
- High clearance lower control arms
- Revolutionary independent three link front end for awesome flex and control
- Rear triangulated 4 link that allows for removal of the rear track bar and provides anti-squat for unparalleled climbing ability. Triangulated 4 links are more robust than tri link designs.
- Rear Stretch providing a perfect 102" wheel base.
- Skid Plate mount design that adds structure to the frame, provides a 1" gain in ground clearance, has a smooth bottom, and is made from 1/4" thick steel.
- Weld on rear cradle for greater rear axle strength.
- allows for 37" tires
- Limited lifetime warranty
- Upgradeable to any of Rock Krawler's coil over products.
|
2 front linear coil springs, 4 high misalignment/double-adjustable lower long arms made from 2.00" solid stock, skid plate and skid plate mounting brackets made from 1/4 thick laser cut steel, 1 adjustable front upper torque arm made from solid stock, high misalignment / adjustable front track bar made from solid stock, front track bar relocation bracket made from 1/4" thick/laser cut steel, rear upper triangulated 4 link arms made from solid stock, rear triangulated 4 link mounting cradle/axle truss made from 1/4" thick laser cut steel, extended stainless steel brake lines, front adjustable sway bar disconnects, hardware and detailed instructions. |
97-02 7" Long Arm Stretch System |
|
03-06 7" Long Arm Stretch System |
|
97-06 TJ/Rubicon Wrangler 4WD
7"
X Factor Plus Long Arm System
Rock Krawler is proud to bring you the new TJ 7.0 X Factor Plus Suspension Systems. These systems feature revolutionary independent 3 link front end with track bar and a triangulated 4 link rear end that allows for removal of the rear track bar. Their modular skid plate design actually clam shells the frame top and bottom with no side drilling required. This adds structure to that frame. With the 3 piece construction; servicing of the driveline is still easy and does not involve any suspension modifications. The frame rail members can be bolted in or welded on and for added rear axle structure a weld in cradle can be substituted for the bolt in differential plate. High clearance lower control arms are made of 2” solid stock and use 1” shank Monster Bushing joint at the frame connection and 1” shank Krawler Joints with a 65,000 pound radial load capacity at the axle connection. Rock Krawler backs this up with our Abuse Proof Lifetime Guarantee on all hard parts.
- Excellent Highway Ride and Handling
- High Clearance Lower Control Arms
- Revolutionary Independent Three Link Front End for Awesome Flex and Control
- Rear Triangulated 4 Link That Allows for Removal of the Rear Track Bar and Provides Anti-Squat for Unparalleled Climbing Ability Triangulated 4 Links are More Robust than Tri Link Designs
- Skid Plate Mount Design that Adds Structure to the Frame, Provides a 1" Gain in Ground Clearance, Has a Smooth Bottom and is Made from 1/4" Thick Steel
- Weld on Rear Cradle for Greater Rear Axle Strength
- Massive 2" Solid Control Arms
- RTI 1400+ on a 20 Degree Ramp
- Allows for 37" Tires
- Limited Lifetime Warranty
- Upgradeable to any of Coil Over Products
|
4 linear coil springs, 4 high misalignment/double-adjustable lower long arms made from 2.00" solid stock, skid plate and skid plate mounting brackets made from 1/4 thick laser cut steel, 1 adjustable front upper torque arm made from solid stock, high misalignment/adjustable front track bar made from solid stock, front track bar relocation bracket made from 1/4" thick/laser cut steel, rear upper triangulated 4 link arms made from solid stock, rear triangulated 4 link mounting cradle/axle truss made from 1/4" thick laser cut steel, extended stainless steel brake lines, front adjustable sway bar disconnects, extended rear sway bar links, hardware and detailed instructions. |
97-02 7" Long Arm Stretch System |
|
03-06 7" Long Arm Stretch System |
|
97-06 TJ/Rubicon Wrangler 4WD
7"
X Factor Plus Comp
Long Arm System
Rock Krawler's system features their revolutionary independent 3 link front end with track bar and a triangulated 4 link rear end that allows for removal of the rear track bar. The 3 link front end with track bar is the very same system used by professional rock crawlers today and is the best articulating front end design for conventional steering, bar none! Coupling this great front end geometry with adjustable coil over racing shocks placed in a fashion that gives improved stability. The triangulated 4 Link members can be purchased as long or short rear upper arms, so you do not have to replace your cat back exhaust. Their modular skid plate design actually clam shells the frame top and bottom with no side drilling required. This adds structure to that frame. With the 3 piece construction; servicing of the driveline is still easy and does not involve any suspension modifications. The frame rail members can be bolted in or welded on and for added rear axle structure a weld in cradle can be substituted for the bolt in differential plate. Their high clearance lower control arms are made of 2” solid stock and use 1” shank Monster Bushing joint at the frame connection and 1” shank Krawler Joints with a 65,000 pound radial load capacity at the axle connection. Rock Krawler backs this kit with their Abuse Proof Lifetime Guarantee on all hard parts.
- Excellent Highway Ride and Handling
- High Clerance Lower Control Arms
- Comes with massive 12" travel RRD racing coil over shocks up front
- Revolutionary independent three link front end for awesome flex and control
- Massive 2" control arms.
- Allows for 37" tires
- Limited lifetime warranty
- Upgradeable to rear coil over racing shocks.
|
RRD Racing Coil Over Shock Assemblies up Front, Front upper and lower coil over shock mounts made from 1/4" thick laser cut steel, 2 rear linear coil springs, 4 high misalignment/double-adjustable lower long arms made from 2.00" solid stock, skid plate and skid plate mounting brackets made from 1/4 thick laser cut steel, 1 adjustable front upper torque arm made from solid stock, high misalignment / adjustable front track bar made from solid stock, track bar relocation bracket made from 1/4" thick laser cut steel, front track bar relocation bracket made from 1/4" thick / laser cut steel, rear upper triangulated 4 link arms made from solid stock, rear triangulated 4 link mounting cradle/axle truss made from 1/4" thick laser cut steel, extended stainless steel brake lines, front adjustable sway bar disconnects, extended rear sway bar links, hardware and detailed instructions.
|
97-02 7" Long Arm System |
|
03-06 7" Long Arm System |
|
97-06 TJ/Rubicon Wrangler 4WD
7"
X Factor Plus Comp
Long Arm Stretch System
Rock Krawler's systems feature revolutionary independent 3 link front end with track bar and a triangulated 4 link rear end that allows for removal of the rear track bar. The 3 link front end with track bar is the very same system used by professional rock crawlers today and is an awesome articulating front end design for conventional steering. Coupling this great front end geometry with adjustable coil over racing shocks placed in a fashion that gives improved stability. The triangulated 4 link rear arms push the rear axle back to provide an awesome 102" wheen base. Their moular skid plate design actually clam shells the frame top and bottom with no side drilling required. This adds structure to the frame. With the 3 piece construction; servicing of the driveline is still easy and does not involve any suspension modifications. The frame rail members can be bolted in or welded on. Their high clearance lower control arms are made of 2" solid stock and use a 1" shank Monster Bushing joint at the frame connection and 1" shank Krawler Joints with a 65,000 pound radial load capacity at the axle connection. All hard parts come with Rock Krawler's abuse proof gurantee.
- Excellent Highway Ride and Handling
- High clearance lower control arms.
- Revolutionary independent three link front end for awesome flex and control.
- rear stretch providing a perfect 102" wheel base
- Massive 2" soli control arms.
- Allows for 37" tires.
- Limited lifetime warranty
- Upgradeable to any of Rock Krawler's coil over products.
|
RRD Racing Coil Over Shock Assemblies up Front, Front upper and lower coil over shock mounts made from 1/4" thick laser cut steel, 4 high misalignment / double-adjustable lower long arms made from 2.00" solid stock, skid plate and skid plate mounting brackets made from 1/4 thick laser cut steel, 1 adjustable front upper torque arm made from solid stock, high misalignment/adjustable front track bar made from solid stock, track bar relocation bracket made from 1/4" thick laser cut steel, front track bar relocation bracket made from 1/4" thick/laser cut steel, rear upper triangulated 4 link arms made from solid stock, rear triangulated 4 link mounting cradle/axle truss made from 1/4" thick laser cut steel, extended stainless steel brake lines, front adjustable sway bar disconnects, hardware and detailed instructions.
|
97-02 7" Long Arm System |
|
03-06 7" Long Arm System |
|
97-06 X Factor Plus Steering System
The Rock Krawler X Factor Plus Steering System offers a true independent drag link and tie rod assembly. The new drag link maintains the OEM relationship while the tie rod is flipped on top of the steering knuckle for improved clearance. The new tie rod is made of solid alloy steel and offers a great place to mount your hydro assist if you would like to run one. All hardware connections use rugged 5/8 diameter bolts.
- Super strong tie rod and drag link assemblies
- Simple plug and play installation
- Indpendent tie rod and drag link - No inverted Y assembly
- High clearance tie rod
- Valid for most popular aftermarket lift kits from 4 to 8 inches
|
(1) Heavy duty drag link assembly made from solid alloy steel, (1) heavy duty tie rod assembly made from solid alloy steel, hardware and detailed instructions.
|
97-06 X Factor Plus Steering System |
|
|
