This 6 inch Pro Comp suspension kit provides excellent handling and proven replacement high strength extended steering knuckle design. Provides proper geometry for the steering, CV axles and other suspension components. All of these kits are 100% compatible with the factory Stabilitrak electronic stability control system. The one piece cross members install easily and keep everything aligned properly.
The premium kit replaces the front factory coil over with MX2.75 coil-overs. Also included are the MX6 adjustable rear shocks. This kit also includes the CV type front dirve shaft with different differential drop brackets to set the driveshaft angle proper for the CV type driveshaft. This kit is compatible with autotrac or can be used for high speed 4WD operatoin without causing the slight front driveshaft vibration.
|Lift Height||6 inch|
|Notes||A few notes before ordering this system, you cannot run the factory wheels with these kits the backspacing on the factory wheels are too deep and will not clear the extended steering knuckle. Pro Comp recommends a 17 inch or larger wheel not to exceed 8 inch in width with a max of 5 inch backspacing. Additionally, a quality tire of radial design not exceeding 35 inch tall x 12.5 inch wide is also recommended. The use of a 35 inch x 12.5 inch tire will require minor trimming. These kits are not compatible with factory autoride systems. Jack-it offers other kits that will work with the autoride system if your vehicle is equipped with that option.|