Why a 4-link system? It's simple, through full wheel travel there is less than 1 degree of caster change (front axle rotation), this means control in the steering wheel over rough terrain. The stability in the steering wheel is noticeable even under normal driving conditions. In addition to 4 beefy control arms, this kit comes with new 4-link frame mounting brackets. These aren't a drop down bracket, they actually replace the stock mounting system. -Don't worry, no welding required. The kit also comes with a new steering stabilizer, anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle and bump stop extension.
The rear is lifted via a 3 inch block and U-bolt kit or choose to upgrade to BDS full replacement leaf springs.
Choose between gas and diesel configurations, as well as plenty of upgrades and accessories when customizing your kit.
Tire and Wheel Combinations:
32 inch x 12.5 inch w/ 17 x 9 and 4.5 inch back spacing
Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 3
All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique 'No BS Hardcore Lifetime Warranty'.
|Manufacturer Part Number||329h/330/345h/346h|
|Lift Height||4 inch|
These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have been ordering.