BDS Suspension's BDS809H 3" suspension lift kit for the late model 4Runners will give clearance for up to 285/70r17 tires. Up front the system uses a combination top mounted strut spacer along with a preload spacer to lift the vehicle and retain the factory geometry. This setup allows the suspension to operate smoothly without forcing upper ball joints to max out at full droop causing premature wear, a common issue with other 3" kits that just use spacer to provide lift.

In the rear this kit replaces the factory coil springs with 2" BDS ProRide coil springs to level the stance. These coil springs are capable of full coil bind from repeated use and abuse and guaranteed to always spring back to original ride height. With the new stance set, NX2 series shocks are used to retain the ride quality and allow full articulation of the rear suspension. Lastly the rear sway bar links are replaced with longer links to allow the sway bar to operate in its ideal position with the lift installed. Get more out of your late model 4Runner with BDS Suspension.

Top Features and Benefits

• Lifts vehicle 3 inch front / 2 inch rear
• Top mount strut spacer & preload maintain factory geometry
• ProRide rear coil springs
• Average Install Time: 5 hours
• Proudly made in the USA, using only premium quality components
• Includes rear BDS NX2 Shocks
• No Fine Print Lifetime Warranty

Tire & Wheel Combinations

• 275/60R20 and Stock/4.75" backspacing
• 285/70R17 and 17 x 8 w/ 5" backspacing

Premium Quality, Lifetime Warranty and Protection

BDS Suspension manufactures only premium quality suspension products. All are backed by a "No Fine Print" limited lifetime warranty. Guaranteeing all products to be free from defects in material and workmanship to the original retail purchaser. If you break it, they replace it...period.