search by Part Number
 
 

Your Suspension Lift Kit,
Body Lift Kit and 4x4 Source.

 
 
  Site Resources

RCD DODGE SUSPENSION LIFT KITS

 

RCD DODGE SUSPENSION LIFT KITS

RCD Dodge Lift KitAll RCD Suspension Lift Kits come with Zinc 5100 Series Bilstein Shocks with Black Boots, unless otherwise specified in the product description. Some pictures may show yellow Bilstein Shocks, but those have been replaced with the silver Zinc 5100 Series Bilstein Shocks.

 

94 - 01 1500 4WD P/U - All
94 - 01 2500 4WD P/U - All



94 - 01

1500 4WD P/U-All
3" Lift Kit
  • RCD "Gator Black" polyurethane powder coat finish for lasting good looks.
  • Grade 8 hardware for reliability.
  • Four custom matched bilstein monotube gas pressure shocks for maximum performance and ride characteristics.
Footnotes
  • Clears 33" x 12.5" tires on 8" wheels.
  • Any change in tire diameter, larger or smaller than original equipment may require recalibration of the computer, speedometer and/or ABS braking system if so equipped.
  • System is designed for models built on / or after 2/9/1994.
  • Not recommended for vehicles with factory "Off Road" Package.
  • Kit features replacement upper and lower arms with coil spring spacer and 4 Bilstein Shocks.


Back to Top


94 - 01

1500 4WD P/U-All
6" Lift Kit
  • Two progressive rate coil springs; hot wound, shot peened and pre-set (longer springs, no spacers needed!)
  • Replacement upper & lower links with polyurethane encased flex joints at the axle provide superiour front end travel and articulation.
  • Front trac bar and upper link relocation brackets along with replacement forged pitman arm maintains precise steering geometry.
  • Sway bar drop down brackets retain correct sway bar angles.
  • Rear lift blocks feature factory style bump stop wing to maintain full load carrying capacity.
  • RCD "Gator Black" polyurethane powder coat finish for lasting good looks.
  • Grade 8 hardware for reliability.
  • Four custom matched bilstein monotube gas pressure shocks for maximum performance and ride characteristics.
Footnotes
  • Clears 33" x 12.5" tires on 8"-10" wheels.
  • Any change in tire diameter, larger or smaller than original equipment may require recalibration of the computer, speedometer and/or ABS braking system if so equipped.
  • System is designed for models built on / or after 2/9/1994.
  • Actual lift may vary based upon engine and chassis combinations. Factory "Off Road" Package equipped vehicles will achieve 1" less lift than standard equipment vehicles.
  • Driveline modifications may be required. Call RCD Technical Assistance for details.
  • Welding by a certified welder is required for installation of this system.
  • System features uppper and lower replacement arms with high angle flex joints, new coil springs, trac-bar relocation bracket, and 4 Bilstein 5100 Series Shocks.
  • Pitman Arm for 94 - 99 (not in kit) 10-20257. (Available in Pricing)
  • Pitman Arm for 00 - 01 (not in kit) 10-20270. (Available in Pricing)


Back to Top


94 - 01

2500 4WD P/U-All
2" Lift Kit
  • RCD "Gator Black" polyurethane powder coat finish for lasting good looks.
  • Grade 8 hardware for reliability.
  • Four custom matched bilstein monotube gas pressure shocks for maximum performance and ride characteristics.
Footnotes
  • Clears 33" x 12.5" tires on 8" wheels.
  • Any change in tire diameter, larger or smaller than original equipment may require recalibration of the computer, speedometer and/or ABS braking system if so equipped.
  • System is designed for models built on / or after 2/9/1994.
  • Not recommended for vehicles with factory "Off Road" Package.
  • System features replacement upper and lower arms with coil spring spacer and 4 Bilstein Shocks.


Back to Top


94 - 01

2500 4WD P/U-All
6" Lift Kit
  • Two progressive rate coil springs; hot wound, shot peened and pre-set (longer springs, no spacers needed!)
  • Replacement upper & lower links with polyurethane encased flex joints at the axle provide superiour front end travel and articulation.
  • Front trac bar and upper link relocation brackets along with replacement forged pitman arm maintains precise steering geometry.
  • Sway bar drop down brackets retain correct sway bar angles.
  • Rear lift blocks feature factory style bump stop wing to maintain full load carrying capacity.
  • RCD "Gator Black" polyurethane powder coat finish for lasting good looks.
  • Grade 8 hardware for reliability.
  • Four custom matched bilstein monotube gas pressure shocks for maximum performance and ride characteristics.
Footnotes
  • Clears 33" x 12.5" tires on 8" wheels.
  • Any change in tire diameter, larger or smaller than original equipment may require recalibration of the computer, speedometer and/or ABS braking system if so equipped.
  • System is designed for models built on / or after 2/9/1994.
  • Not recommended for vehicles with factory "Off Road" Package.
  • System features replacement upper and lower arms with coil spring spacer and 4 Bilstein Shocks.
  • Pitman Arm for 94 - 99 (not in kit) 10-20257. (Available in Pricing)
  • Pitman Arm for 00 - 01 (not in kit) 10-20270. (Available in Pricing)


Back to Top