|
RCD
JEEP SUSPENSION LIFT KITS
 All
RCD Suspension Lift Kits come with Zinc 5100 Series
Bilstein Shocks, unless otherwise specified in the product
description. Some pictures may show yellow Bilstein
Shocks, but those have been replaced with the silver
Zinc 5100 Series Bilstein Shocks.
87
- 96 Wrangler YJ 4WD
3" Suspension Lift Kit
|
|
|
- Replacement
leaf springs front and rear feature nylon
anti-friction pads, progressive rate design,
and poly-urethane bushings provide increased
performance and long life.
- Integrated
degree shim is built into rear spring for
proper pinion angle.
- Front
and rear replacement bump-stop relocation
pads.
- Extended
sway bar links optimize sway bar geometry
and function.
- Front
and rear pan-hard bar Relocation brackets
insure proper alignment and function.
- Four
custom matched Bilstein 5100 Series monotube
gas pressure shocks for maximum performance
and ride characteristics.
|
|
|
- Clears
33" x 12.5" tires on 15x8 wheels
- Any
change in tire diameter, larger or smaller
than original equipment may require recalibration
of the computer, speedometer and/or ABS braking
system.
- Actual
ride may vary slightly based upon vehicle
model and accessory options (i.e. winch, H.D.
bumpers, etc.)
- Models
with 13" rear driveline may require drive
shaft lengthening.
|
|
|
Back to Top
97
- 04 Wrangler TJ
3" Suspension Lift Kit
|
|
|
- Clears
31" x 10.5" tires on 15x8 wheels
with maximum 4 5/8" backspacing.
- Any
change in tire diameter, larger or smaller
than original equipment may require recalibration
of the computer, speedometer and/or ABS braking
system.
- Complete
system featuring sway bar link extensions,
front and rear trac-bar brackets, transfer
case lowering kit, shifter bracket, front
and rear coil springs and Bilstein 5100 Series
mono-tube shock absorbers.
- Actual
ride height may vary slightly based upon vehicle
model and accessory options (i.e. winch, H.D.
bumpers, etc.)
- Alignment
is required and aftermarket "Cam Eccentrics"
may be required to achieve proper chamber
/ caster adjustment.
|
|
|
Back to Top
97
- 04 Wrangler TJ
4" Suspension Lift Kit
|
|
|
- Clears
31" x 12.5" tires on 15x8 wheels
with maximum 4 5/8" backspacing.
- Any
change in tire diamter, larger or smaller
than original equipment may require recalibration
of the computer, speedometer and/or ABS braking
system if so equipped.
- Complete
system featuring replacement lower flex arms,
sway bar link extensions, front and rear trac-bar
brackets, transfer case lowering kit, shifter
bracket, front and rear coil springs and (4)
Bilstein 51000 Series mono-tube shock absorbers.
- Actual
ride height may vary slightly based upon vehicle
model and accessory options (i.e. winch, H.D.
bumpers, hard top, etc.
- Four
2 Degree Cam Eccentrics included in kit for
front-end alignment.
|
|
|
Back to Top
|
