You have no items in your shopping cart.
5" 1994-2001 Dodge Ram 1500 4WD Lift Kit
Turn your dodge into the truck you've always wanted! This 5 inch system features upper and lower extended heavy-duty control arms with greaseable polyurethane bushings to properly center the axle and correct caster. The dropped pitman arm combined with the HD track bar bracket corrects the steering geometry and centers the axle.
Whether on road or offroad this system is built to perform including custom valved Zone shocks that have been tuned to the full height 5 inch coils as well as extended polyurethane bump stops. This system also uses replacement sway bar links to eliminate the failure prone factory stem type.
In the rear, a 5 inch rear block and add-a-leaf is used to replace the factory block, no stacking in this system.
- Heavy Duty greaseable control arms included
- Extended length urethane bump stops
- Track bar relocation to properly center your axle
- Pitman arm included to maintain steering geometry
- Completely bolt on system
|Manufacturer Part Number||D44/D45|
|Model||Ram 1500, 1/2 ton Ram|
|Lift Height||5 inch|
|Notes||Aftermarket steering stabilizer required. Factory drag link mount taper will be flipped when dropped pitman arm is installed.
Factory block is replaced with 5 inch block and add-a-leaf combo to obtain a level stance.
Will not fit models built before February 9, 1994 due to track bar stud size.
2001 models with "Offroad Package" will not yield a full 5 inches of lift.