You have no items in your shopping cart.
6.5" 2013-2017 Dodge Ram 3500 Dsl 4WD Radius Arm Lift Kit
This kit offers improved strength, performance, and ride quality over the standard drop bracket kit. Engineered to match the brawn of the Ram trucks, these systems upgrade the factory front radius arms and offer impressive handling characteristics on road while improving offroad performance and allowing for up to 37 inch tires to be installed.
The new radius arms are a substantial upgrade to the factory stamped units and improve the ground clearance compared to drop bracket kits. The arms are fully boxed, internally gusseted and designed to bolt in the factory location while correcting the suspension geometry at 6.5 inch of lift. At the frame mount, the arms utilize extra large, greaseable bushings to isolate road noise and vibrations while the axle mount is designed to retain the factory alignment cams for adjustability. The arms are formed inward to maximize tire clearance and looks great under the new RAM HDs.
In addition to the new radius arms, this system gets its height from 6.5 inch progressive rate front coils designed for a smooth ride for unmatched highway and trail performance. Steering correction comes from a forged dropped pitman arm and a heavy duty, fully welded front track bar bracket is used at the frame to recenter the front axle securely under the truck. Rounding out the front of this 6.5 inch radius arm system are a pair of polyurethane extended bump stops, brake line relocation brackets, your choice of Zone hydro or Zone nitro shocks at all 4 corners, and all the necessary hardware to complete the install. Out back the rear is lifted using a 5 inch block and long u-bolts to level the stance and allow for up to 37 inch tires to be installed.
Featured and Benefits:
- Utilizes Heavy Duty Drop Brackets
- Correct Suspension Geometry
- Progressive Rate Coil Springs
|Manufacturer Part Number||D57|
|Important Notes||Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Models with a 6 bolt transfer case use part #D5613. Models with an 8 bolt transfer case use part #D5813.
Vehicles equipped with a two piece drive shaft and a carrier bearing require optional bearing drop kit #D5405.
Not designed for factory rear airbag suspension models.
Not designed for dually models.
|Model||Ram 3500, 1 ton Ram|
|Shipping Sale||$75 off Shipping|