2.5" 2020 Ford F250/F350 4WD (w/diesel engine) Fox CoilOver Radius Arm Lift Kit by BDS Suspension
Brand: BDS | SKU: 1549F
FREE SHIPPING !!
on orders +$99, exclusions apply
Got Questions? We can help!
This BDS 1549F 2.5 inch coilover lift kit is the ultimate premium suspension system for the Ford F250 / F350 Super Duty trucks. Featuring Fox 2.5 Factory Series Remote Reservior Coil-Overs. These coil-overs replace the factory coil springs and are optimized for performance and ride comfort. Heavy duty radius arms that use 1-3/4" OD -10GA DOM tubing with support gussets, these replacement arms are far superior to the factory stamped steel units. Featuring a high clearance design for extra ground clearance and are formed inward to allow for additional clearance of oversized tires. The arms correct the caster angle by bolting into the factory mounting points and reposition the front axle.
BDS ProRide front coil springs lift the front end 2.5 inches while maintaining performance and ride quality. The front axle remains centered with the use a of heavy duty adjustable track bar. Sway bar drop brackets keep the factory bar from binding.
In the rear the factory blocks are replaced by a pair of 4 inch lift blocks that feature integrated bump stop wings along with e-coated extended u-bolts.
Top Features and Benefits
Tire & Wheel Combinations
Premium Quality, Lifetime Warranty and Protection
BDS Suspension manufactures only premium quality suspension products. All are backed by a "No Fine Print" limited lifetime warranty. Guaranteeing all products to be free from defects in material and workmanship to the original retail purchaser. If you break it, they replace it...period.
Drivetrain Protection - BDS Suspension offers FREE 560Plus Factory Protection Plus. This supplemental drivetrain protection (5 years - 60,000 / 100,000 miles) on select vehicles gives you piece of mind with your purchase. Click here for more info
|Important Notes||1. Designed for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1/2" front ride height).
2. Larger tires on stock wheels are not recommended due to brakeline clearance required. Use recommended specifications listed in tire and wheel fitment section.
3. Track bar mounting hardware requires torque spec of 405 ft-lbs .
4. Steering on F250/F350 trucks can be stiff from the factory. Replacement radius arms with increased caster typically help this issue. The base 2.5" lift with ball joint cams and/or steering stabilizer options will not fix this problem. We have had success in reducing the torque specification to 85 ft-lbs for the upper ball joint. Use this as a last resort to cure factory steering issues.
|Manufacturer Part Number||1549F|
|Lift Height||2 inch|
|Product Type||Suspension Lift Kit|
WARNING : Cancer and Reproductive Harm. www.p65warnings.ca.gov/