The BDS 188H / 188FS High Clearance lift kit for the Chevy Tahoe is a true blend of performance, appearance, and function. The suspension geometry of this 4-inch lift kit creates a factory-style ride and aggressive off-road appearance. The high-arched crossmembers blend perfectly with the angle of the factory-installed lower control arms for a completely integrated look while lifting your vehicle a full 4 inches and increasing ground clearance. Once installed, this kit will allow for the use of up to 33-inch diameter tires.

This complete suspension lift kit includes ductile steering knuckles, which correct steering geometry to factory angles. Heavy-duty front and differential skid plates are also included for extreme off-road protection. The rear lift is accomplished with coil spring spacers, track bar relocation (included with 3" rear lift only), sway bar links, and extended bump stops.

All possible SKUs depending on the option selected: BDS188H, BDS188FS, BDS900H, BDS900FS

Features and Benefits:

• 4-inch front lift / 3-inch or 2-inch rear lift
• High clearance cross members for maximum ground clearance
• Front Coil-over strut cylinders with 18mm shafts are included (uses factory coil springs)
• Heavy-duty front skid plates protect suspension components
• NX2 or Fox shocks are available
• Rear coil spring spacers keep a factory ride
• Ductile steering knuckles are ESC compliant
• Made in the USA
• Takes up to 8-10 hours for installation
• Fits a 32" x 11.50" tire w/17 x 8 and 4.5" backspacing
• Fits a 33" x 12.50" tire w/17 x 9 and 5" backspacing
• Fits a 33" x 12.50" tire w/20 x 9 and 5.75" backspacing
• *May require trimming*

Premium Quality, Lifetime Warranty and Protection

BDS Suspension manufactures only premium quality suspension products. All are backed by a "No Fine Print" limited lifetime warranty. Guaranteeing all products to be free from defects in material and workmanship to the original retail purchaser. If you break it, they replace it...period.