6" 2014-2018 Chevy Silverado 1500 4WD (w/aluminum or stamped steel factory arms) Basic Lift Kit by Fabtech
As low as $2,008.33 Regular Price $2,012.23
Brand: Fabtech | SKU: K1067/K1083
FREE SHIPPING !!
on orders +$99, exclusions apply
Got Questions? We can help!
Gen I Description:
Fabtech's 6 inch Basic System for the forged Steel suspension has been designed utilizing our industry leading crossmember and spindle technology.
Lift is accomplished by utilizing the factory front Coilover shocks with steel spacers that helps retain the stock ride of the front suspension. Our 1/4 inch thick steel lower control arm crossmembers have been formed to fit to the bottom of the frame without having to cut or modify it for a fast installation. Extensive design work was given to the extended length steering knuckles specifically for the Steel component version keeping track width near stock and working properly with the Stablitrac safety functions.
The front differential is relocated with heavy duty brackets while a tightly formed 1/4 inch thick steel skid plate provides protection for offroad use. The rear suspension is upgraded with add a leafs and 5 inch tall blocks and u bolts. The stock rear shocks are replaced with Performance shocks for increase damping.
Gen II Description:
This new Gen II system retains the factory track width keeping the tires under the fenders for a clean appearance. With the factory track width retained the front Sway Bar utilizes the stock end links and mounting holes keeping the leverage on the bar proper. There are no CV spacers, impact struts or add a leafs required for installation. The front differential is relocated in a manner so that when driving at higher 4 wheel drive speeds vibration is reduced.
The GEN II Basic System utilizes a simplistic upper Coilover spacer that provides lift from the top of the shock rather than bottom up with reduced install time. Rear shocks are Performance Twin Tubes.
All bracketry and the skid plate are constructed of 1/4 inch thick steel for maximum strength and proven reliability.
The Fabtech outfitted vehicle was equipped with robotic steering controls, electronic recording data devices and tip outriggers to comply with the Federal test standards. The vehicle passed all mandated testing with perfect results complying with FMVSS126.
|Important Notes||Before ordering visually check your vehicle’s factory suspension for aluminum or steel version. This system will only fit forged steel suspension vehicles.
Will not fit models with Factory AutoRide shocks
Will not fit all wheel drive models.
Cannot use OEM wheel and tire.
Does not fit standard cabs.
|Manufacturer Part Number||K1067/K1083|
|Item Number||fab_k1067 or fab_k1083|
|Lift Height||6 inch|
|Product Type||Suspension Lift Kit|
|Special||Call for Price Match!|
WARNING : Cancer and Reproductive Harm. www.p65warnings.ca.gov/