Name: 3-4" 2021-2022 Ford Bronco (4-Door) 4WD Lift Kit by BDS Suspension
Brand: BDS Suspension
SKU: bds_023410-config
Price: 1192.25 USD

1192.25

Brand: BDS Suspension | SKU: BDS023410 / 023350 / 023300

From $1,192.25 Regular Price $1,255.00

FREE SHIPPING !!
on orders +$149, exclusions apply

Trusted Experts Since 1994, Top Rated service
Got Questions? We can help!
888-452-2548

Product Description

More Information

The BDS Suspension BDS023410 / BDS023350 / BDS02330 3 to 4 inch (depending on sub-model) suspension lift kit for the Ford Bronco (4 door) will allow for fitment of up to 37 inch diameter tires for an amazing aggressive look. Not only will this kit provide a great looking stance but it comes out of the box ready to perform. The 2 piece strut spacer design maintains ride quality without overextending suspension during down travel. Bump stop extensions are installed on each one of the struts, properly limiting uptravel while off-roading. BDS Performance Series Upper Control Arms are supplied with FK uniball joints to bolt into the factory location. Built out of 1.5" OD heavy wall tubing with fully welded integrated support gussets, these upper control arms are designed to improve suspension travel while providing extraordinary strength, clearance, and styling. For extra strenght off-road BDS includes heavy duty tie rod reinforcement sleeves, providing peace of mind on the trail. Features and Benefits: Tubular upper control arms with rubber bushings and FK uni-balls 2 piece strut spacers maintain ride quality Includes bump stop extensions Allows use of 35" up to 37" tires Proudly made in the USA, using only premium quality components Estimated install time: 5-7 hours Difficulty level (Easy 1 - 5 complicated) 3 No Fine Print Lifetime Warranty Factory Protection Plus Premium Quality, Lifetime Warranty and Protection BDS Suspension manufactures only premium quality suspension products. Proudly built in the USA. All are backed by a "No Fine Print" limited lifetime warranty. Guaranteeing all products to be free from defects in material and workmanship to the original retail purchaser. If you break it, they replace it...period. View BDS Suspension BDS023410 / 023350 / 023300 Instruction Manual
Important Notes Fits 4 Door models ONLY Trimming may be required for certain tire and wheel combos 35" Tires \| 5" Backspacing recommended for clearance through full wheel travel. 37 Tires \| Will rub front body mount through wheel travel, trimming may be required Intrusion Beams will need to be removed with both of these wheel/tire combinations. BDS Suspension recommends to lubricate the COM joints every oil change / 3,000 miles using either Tri-Flow Superior Dry Lubricant (No. TF21013) or CRC Dry PTFE Lube (No. 03044). The COM joints are held in using a large snap ring. Be sure to clear the COMs using a damp cloth to remove any dirt and debris in the cup and on the bottom surface in order to extend the life of the COM joint. When used in salty / a more corrosive environment, more frequent maintenance may be required. Replacement COM joints service kits are available: BDS083204 service kit includes (1) COM joint and (1) snap ring. BDS083203 service kit includes (1) COM joint, (1) snap ring, (1) upper misalignment, (1) lower misalignment, and (1) cap. BDS073201 service kit includes (2) rubber bushings. Do NOT hit the aluminum knuckle with a hammer to separate the ball joint. Use appropriate ball joint separation tool (OTC 204-592). Will not work with models with a height sensor attached to the UCA. A BASE model is considered a Bronco with struts that are BLACK from the factory. Base, Big Bend, Black Diamond, and Outer Banks all come standard with BLACK struts. A BADLANDS model is considered a Bronco with struts that are Yellow from the factory with the reservoir pointing upwards. A Badlands is its own specific model with its own specific suspension package. A SASQUATCH model is considered a Bronco with struts that are Yellow from the factory with the reservoir pointing downwards. Any model can be OPTIONED to a Sasquatch package. Sasquatch is STANDARD on Wildtrack, Everglades, and First Edition. A Badlands WITH Sasquatch is a SASQUATCH suspension package. 023300 & 023301 can be used ONLY with Sasquatch Suspension Package vehicles. This kit is designed to lift the front of the vehicle 3" and rear 2". CV axle nut may need to be loosened and tightened on the ground with the weight the vehicle. Although 37" x 12.50 will work at ride height, the tires will still contact the front body mount and possibly rear inner fender through wheel travel and steering lock to lock. If running this size tire and using the full suspension travel, these areas must be addressed. Does not fit Bronco Sport models. Tie rod end sleeve is designed for use on stock inner tie rod ends. Will not work with larger aftermarket inner tie rod ends. The tie rod end sleeve will cover the threads / adjuster section of the inner tie rod to strength a potential weak point of the tie rod. With this the adjustment of the inner tie rod becomes abnormal for a standard alignment shop. To adjust the inner tie rod, depending upon how much of the inner tie rod is showing, remove the clamp on the inner boot and push the boot up towards the steering rack. The inner tie rod can now be turned in order to adjust the toe. Net lift height will vary based on OE shock package (4" on base shocks, 3.5" badlands models, and 3" on Sasquatch package)

Vehicle Fitment

Make	Ford
Model	Bronco
Year Fitment	2022, 2021
2WD/4WD	4WD

Tech Specs

Manufacturer	BDS Suspension
Manufacturer Part Number	BDS023410 / 023350 / 023300
Item Number	bds_bds023410-023350-023300
MPN(UPC)	658848615698
Product Line	Lift Kits
Lift Height	4 inch