6.5" 1987-2001 Jeep Cherokee XJ 4WD Long Arm Suspension Lift Kit by BDS Suspension

The BDS 1433H 6.5 inch premium coilover suspension lift kit for the Jeep Cherokee XJ will allow for fitment of up to 33 inch diameter tires for a great off-road look. The BDS 6.5" XJ Long Arm system provides the best on and offroad capability you could ask for and is designed to clear 33x12.50's with room to flex. By maximizing the length of both the upper and lower control arms, BDS has minimized caster change for optimim handling and minimized road forces transmitted ultimately to your seat for the best ride. To give you some idea, the lower arms are nearly bottomed out at just over 32" and the uppers at just over 28". This is about double the length of the factory control arms!

Although this XJ long arm system makes for a great daily driver, the true abilities of this system won' t be appreciated until you hit the rocks, dirt and mud. The 4-Link design maintains better axle control through wheel travel than any radius arm system because the upper to lower link relationship is not fixed, yet is tuned for optimum performance based on link length and operating angles. The control arm geometry is setup with the massive belly pan that incorporates the link mounts and is built to smash rocks. No welding to the uni-body is required nor recommended.

BDS Pro-Ride Coil Springs, built from 5160 spring steel & pre-set to withstand full coil bind with a tuned rate to lilft the front. The rear is lifted with new Glide-Ride Leaf Springs and extended greasable shackles that really let the springs flex.

This system also incorpoartes BDS Ultimate sway bar disconnects for quick easy access to rediculous wheel travel and stainless steel brake lines to handle it. Bump stop extension are included to limit compression and keep the tires out of the fenders on the trail. A front adjustable track bar fits into the existing frame mount, so drilling of the taper is not required and will allow you to accurately center the front axle. To match the steering w/ the track bar angle, an extreme drop pitman arm is provided.

Features and Benefits:

• Long Arm Control Arms improve off-road performance
• Front Adjustable Track Bar keep axle centered
• Glide-Ride Rear Leaf Springs replace worn factory springs
• BDS NX2 Shocks or Fox 2.0 Performance Shocks
• Estimated Install Time: 10 hours
• Difficulty Leve (easy 1-5 complicated): 3
• No Fine Print Lifetime Warranty (you break it, we replace it)
• Best Quality and Engineering in the Industry
• Proudly Made in the USA
• Up to 33" x 12.50" w/15 x 8 and 4.5" back spacing
• Trimming may be required

Premium Quality, Lifetime Warranty and Protection

BDS Suspension manufactures only premium quality suspension products. Proudly built in the USA. All are backed by a "No Fine Print" limited lifetime warranty. Guaranteeing all products to be free from defects in material and workmanship to the original retail purchaser. If you break it, they replace it...period.