This Carli Suspension CS-DSSOSK-Y-STK Opposing Steering Stabilizer kit for the Dodge Ram 2500 / 3500 encompasses both the Low-Mount and High Mount Stabilizers, along with the addition of the Differential Guard and Bracket. The Differential Guard and Bracket serve the purpose of offering an alternative method for installing the low-mount stabilizer, thereby altering its corrective orientation. By attaching the stable side of the stabilizer to the Diff Guard Bracket and the clamp to the steering system, a force is applied towards the passenger side to counterbalance the push towards the driver's side caused by the High-Mount Stabilizer. This configuration represents the most effective correction approach, as it presents a fully customizable steering stabilization package that can be adjusted to a neutral setting for accurately aligned trucks. Additionally, it can be fine-tuned to address any potential radial pulling, all while affording safeguarding for the differential mechanism.

Carli Stabilizers feature their IFP (internal floating piston) technology, a superior choice compared to Emulsion shocks, which are commonly used for affordability but have limitations in performance and longevity. The body is made from 304 Stainless Steel and truly looks amazing while minimizing effects from the elements and road debris. An billet aluminum Top-Cap made from a solid piece of aluminum houses a Teflon lined 1/2 inch bearing and o-ring style Schrader valve. The opposite end of the stabilizer uses another billet aluminum rod end housing a 17-4 stainless high-misalignment pin inside a 1/2 inch bearing for bind-free performance.

Features & Benefits:

• Improves handling - Increased steering predictability, minimized volatility and reduced driver fatigue
• Fits Y-Styling steering
• True opposing steering stabilizer setup, high and low mount
• Higher nitrogen charge pushes to the left and right to counter-act a right or left hand tire pull (common with larger tires). Each stabilizer pushes the opposite direction, can reduce charge in one to increase push in a single direction
• Adjustable Nitrogen Charge - Schrader valve allows customer to bleed the pre-charged stabilizer (pressurized at 200 psi for right push, or drop to 70 psi for no directional influence)
• IFP design (Internal Floating Piston)
• Includes all required brackets and hardware
• 304 Stainless Steel Body with Aluminum Top-Cap
• Billet Aluminum rod ends with 1/2 inch bearings
• 17-4 stainless high-misalignment pin inside a 1/2 inch bearing for bind free performance
• Adjustable Nitrogen Charge - Schrader valve allows customer to bleed the pre-charged stabilizer (pressurized at 200 psi for right push, or drop to 70 psi for no directional influence)
• Fits stock height models only
• Diff guard and bracket included
• Adjusts for any radial pull
• Carli provides a Limited Lifetime Warranty