The Fabtech K2383 3 inch Uniball Upper Control Arm lift kit for the Ford Bronco provides additional lift while keeping a level stance front to rear. This kit replaces the factory upper control arms with new Fabtech Uniball Upper Control Arms, providing additional wheel travel and adds an extra degree of caster compared to the stock control arms. Increased caster improves steering effort with oversized tires. Fabtech constructs their upper control arms out of the finest materials with .120" walls 1.25" OD 4130 Chromoly steel tubing. 1" FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints, which allow for incrased travel without the worry of suspension bind. These heavy duty arms are designed for longevity in rugged conditions while providing a better on-road ride quality.

The factory front and rear coilover shocks are retained and recieve spacers, providing additional lift height while maintaining comfortable on-road ride quality. When this vehicle is lifted, the rear axle becomes offset to the vehicle. Fabtech addresses this with a heavy-duty track bar relocation bracket that re-centers the axle under the vehicle. This provides proper tracking of the axle to the vehicle as Ford intended.

Features and Benefits:

• Allows use of up to 35 inch diameter tires
• Control Arms eliminate factory ball joint with HD 1" ID Stainless American Uniball
• Chromoly tubing reduces flex found in stock arms, providing better on-road ride
• 17-4 Stainless steel heat treated uniball pin fits into factory ball joint taper without modification to the spindle
• Retains stock coilover shocks for a factory ride
• HD Track Bar bracket re-centers the axle under the vehicle
• Great system for daily drivers and weekend off-roaders!
• 5 year 60,000 mile powertrain warranty

Recommended Tires Sizes

• 35/12.50R17 tires w/ 17×9 wheels w/ 4 1/2″ BS w/ minor trimming
• 35/12.50R18 tires w/ 18×9 wheels w/ 4 1/2″ BS w/ minor trimming
• 35/12.50R20 tires w/ 20×9 wheels w/ 4 1/2″ BS w/ minor trimming