* Some items are excluded due to manufacturer restrictions. Tires, wheels, and leaf springs sold individually or in pairs are excluded. Only one coupon code may be applied per order. Coupon codes may not be combined with other discount codes or applied to prior orders. Coupon codes may or may not apply to sale items, depending on the item.
This BDS Suspension BDS560H - FS / BDS553H - FS 6-inch premium suspension lift kit for the Ford F250 / F350 will allow for fitment of up to 37-inch diameter tires for a great off-road look. This kit includes two 6" Pro-Ride Coil Springs and features a full replacement four-link system centered around 4 massive control arms featuring greaseable ends. The 4-link system reduces caster change through wheel travel, creating a more controlled feel both on and off road. The kit also comes with anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle, and a bump stop extension. The rear is lifted via a 5" block kit or full replacement Glide-Ride leaf springs.
All possible SKUS depending on options selected: BDS553H, BDS553FS, BDS560H, BDS560FS, BDS561H, BDS561FS, BDS564H. BDS564FS, BDS565H, BDS565FS, BDS551H, BDS551FS
Features and Benefits:
4 Link control arm design replaces factory radius arms
Improves suspension performance on all types of terrain
Pro-Ride front coil springs
Track bar brackets keep the front axle centered
Estimated Install Time: 8 hours
Difficulty Level (easy 1-5 complicated): 3
No Fine Print Lifetime Warranty
Best Quality and Engineering in the Industry
Proudly Made in the USA
Fits a 37" x 13.50" tire w/17 x 9 and 4.5" back spacing
Fits a 37" x 13.50" tire w/18 x 9 and 4.5" back spacing
Fits a 37" x 13.50" tire w/20 x 9 and 4.5" back spacing
*Trimming may be required*
Premium Quality, Lifetime Warranty and Protection
BDS Suspension manufactures only premium quality suspension products. Proudly built in the USA. All are backed by a "No Fine Print" limited lifetime warranty. Guaranteeing all products to be free from defects in material and workmanship to the original retail purchaser. If you break it, they replace it...period.
Installation of the rear block kit will result in a "pre-runner" look with the rear of the vehicle 2" lower than the front. To get a level stance you must upgrade to the rear leaf spring option.
These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section.
Although extremely rare, front driveline vibration may occur.
Front exhaust modification may be required to clear the front driveshaft on gas models.
U-bolts will not fit dually models.
Dropped pitman arm will not fit 10 lug wide track F350 models.