* Some items excluded due to manufacturer restrictions. Leaf springs sold individually or in pairs are excluded. Only one coupon code my be applied per order. Coupon codes may not be combined with other discount codes or applied to prior orders. Coupon codes may or may not apply to sale items depending on the item.
BDS Suspension's 753H High Clearance Lift Kit for the 2020 thru 2023 Chevy Silverado 2500HD / 3500HD 4wd will raise your vehicle 6.5 inches which will allow use of 37 inch or 38 inch tires (depending on installed wheels) to improve off-roading performance while keeping great handling and ride quality.
This premium quality suspension lift kit is built around a set of 1/4 inch thick steel laser cut high clearance crossmembers that are designed to get maximum clearance and provide a rock solid mounting point for the factory lower control arms. A heavy duty front skid plate connects the cross members while protect steering and driveline components. Correct steering geometry is maintain using new ductile iron steering knuckles that keep the ESC system compatibility. CV axle angles are kept at a minimum using a multi-point front differential relocation system. The rear end is lifted using 5 inch tall axle blocks with extended ubolts.
Fox 2.0 Performance IFP Shocks, BDS NX2 Shocks or Fox 2.5 Peformance Elite Adjustable Shocks are included for the front and rear.
Lifts vehicle 6.5 inch front / 5 inch rear
1/4 Inch Steel High Clearance Crossmembers
Heavy Duty Front Skid Plate
High Clearance design requires no torsion bar drop for max clearance
Ductile Iron Heavy Duty Steering Knuckles keep ESC System compliance
Multi-Point Front Differential Relocation System
Extended Stainless Steel Brake Lines
Allows use of up 38 inch tires
Average Install Time: 8 hours
Fox 2.0 Performance IFP Shocks, BDS NX2 Shocks or Fox 2.5 Peformance Elite Adjustable Shocks
No Fine Print Lifetime Warranty
Factory Protection Plus
Tire & Wheel Combinations
Tires: 37 x 12.50, Wheels: 17x9, Backspacing: 4 1/2 to 4 5/8 inch
Tires: 37 x 12.50, Wheels: 18x9, Backspacing: 4 1/2 to 4 5/8 inch
Tires: 37 x 12.50, Wheels: 20x9 or 22x9, Backspacing: 4 1/2 to 6.18 inch
Tires: 38 x 12.50, Wheels: 20x9 or 22x9, Backspacing: 5 1/2 to 6.18 inch
Premium Quality, Lifetime Warranty and Protection
BDS Suspension manufactures only premium quality suspension products. All are backed by a "No Fine Print" limited lifetime warranty. Guaranteeing all products to be free from defects in material and workmanship to the original retail purchaser. If you break it, they replace it...period.
Drivetrain Protection - BDS Suspension offers FREE 560Plus Factory Protection Plus. This supplemental drivetrain protection (5 years - 60,000 / 100,000 miles) on select vehicles gives you piece of mind with your purchase. Click here for more info
Torsion Bar Tool required to load/unload the torsion bars
Requires frame bracket modification
Models with two-piece rear driveshafts will require a carrier bearing drop kit
Factory 17-18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled with up to a 35x12.50 tire
In some cases vehicles used in 4WD on the highway regularly could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft
Do not install this suspension system in conjunction with any type of torsion bar lift keys to achieve more that tested 6.5" lift height
U-bolts will not work vehicles equipped with top-mounted overload springs or add-a-leafs.
Compatible with gas or diesel models
Compatible with standard models as well as AT4 models
Some minor trim will be required with certain wheel/tire combination. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks. Trimming will normally included the bottom edge of the inner fender shrouds and/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter/narrower tires will reduce/eliminate trimming required.