6" 2014-2018 Chevy Silverado 1500 Basic GEN II Lift Kit by Fabtech

The Fabtech K1083 / K1084 Gen II 6" lift kit for the Chevy Silverado 1500 will allow use of upto 35 inch diameter tires and retains the factory track width keeping the tires under the fenders. With the factory track width retained the front Sway Bar utilizes the stock end links and mounting holes keeping the leverage on the bar proper. There are no CV spacers, impact struts or add a leafs required for installation. The front differential is relocated in a manner so that when driving at higher 4 wheel drive speeds vibration is reduced. Upper coilover spacers that provide lift from the top of the shock rather than bottom up with reduced install time. Rear shocks are Performance Twin Tubes or Stealth monotube gas.

Top Features and Benefits

• Allows use of the 35 inch tires
• Keep factory track width, tires stay under the fenders
• 1/4 inch steel contruction used for brackets
• Upper coil / strut spacers lifts the front end with sacrificing ride quality
• Zero bump steer throughout travel range
• Rear blocks and ubolts
• Limited Lifetime Warranty

Recommended Tires and Wheels

• Use 35/1250R 17 tires w/ 17x8 wheels w/ 5 inch BS w/ minor trimming
• Use 325/65R 18 tires w/ 18x9 wheels w/ 5 inch BS w/ minor trimming
• Use 35/1250R 20 tires w/ 20x9 wheels w/ 5 inch BS w/ minor trimming