Skyjacker's Softride Springs use only American steel and the individual leafs of each spring are shotpeened with hard steel pellets at very high velocities. This shotpeening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shotpeening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring.
Softride springs use 'bolt' style spring clips, eliminating friction. Other spring designs use the 'cinch' style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker Softride springs taper over the entire width of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
|Manufacturer Part Number||FR54S|
|Model||F250, F250 SD, F250 Super Duty|
|Lift Height||3-4 inch|
|Notes||Factory block can be removed to reduce lift 2 inches on 80-86 models or 3.25 inch on 73-79 models. Does not fit Highboy models.|