4" 2019-2024 Dodge Ram 3500 4WD (w/gas engine) Lift Kit by BDS Suspension

The BDS Suspension BDS1700H / BDS1700FS 4-inch radius arm lift kit for the Dodge Ram 3500 is an excellent way to upgrade your suspension and fit up to 37-inch tires. This kit features heavy-duty radius arms that replace factory-stamped steel radius arms. These arms bolt directly in the OEM position and correct the suspension geometry. Coil springs provide extra height and smooth, controlled performance in the harshest of terrains. A forged drop pitman arm corrects steering angles along with an HD bar drop bracket in order to re-center the front axle. Sway bar drop brackets reposition the OE sway bar, optimizing performance. Additionally, extended polyurethane bump stops limit up travel, and brake line brackets allow full suspension droop.

At 4" of lift, correcting the front driveline angle is critical to maintaining the use of the 4WD. To accomplish this, BDS Suspension provides a heavy-duty replacement transmission cross member as well as a transfer case indexing ring to reposition the front driveline output, allowing the use of the factory drivelines.

The RAM 3500 kits' rear includes a 3-inch block and u-bolt kit for a level-to-slightly high tail height while maintaining tow capacity.

Choose from Fox 2.0 Performance IFP Shocks (2-inch diameter aluminum body monotube gas), BDS NX2 Shocks (Nitro Gas), or Fox 2.5 Performance Elite Adjustable Shocks (2.5-inch diameter aluminum body with ride adjustment knobs), which are included for the front and rear.

All possible SKUs depending on options selected: BDS1700H BDS1700FS BDS1700FPE BDS1701H BDS1701FS BDS1701FPE BDS1702H BDS1702FS BDS1702FPE BDS1703H BDS1703FS BDS1703FPE

Features and Benefits:

• 4-inch front lift / 2-inch or 3-inch rear lift
• Allows use of up to 37-inch diameter tires
• Heavy-duty replacement radius arms
• Premium quality components
• Progressive Rate Front Coil Springs
• Forged Drop Pitman Arm
• Front Track Bar Relocation Brackets
• Average install time: 7-8 hours
• Made in the USA
• No Fine Print Lifetime Warranty
• Fits a 37 inch x 13.5 inch tires w/ 17/18/20 inch x 9 and 5.625 inch backspacing
• Fits a 35 inch x 12.5 inch tires w/ 18/18/20 inch x 9 and 4.5 inch backspacing
  • *Trimming may be required*

Shock Options

• BDS NX2 Nitro: Nitro-charged, twin-tube design, steel body with Silver powder coat finish
• Fox 2.0 Performance Series: 2-inch aluminum body, mono-tube gas design, 5/8 inch steel shaft, anodized finish
• Fox 2.5 Performance Elite: 2.5-inch aluminum body, 7/8-inch steel shaft, external reservoirs, DSC external ride-adjustment

Premium Quality, Lifetime Warranty and Protection

BDS Suspension manufactures only premium quality suspension products. All are backed by a "No Fine Print" limited lifetime warranty. Guaranteeing all products to be free from defects in material and workmanship to the original retail purchaser. If you break it, they replace it...period.