3" 2023 Ford F250/F350 4WD Radius Arm Lift Kit by BDS Suspension
FREE SHIPPING !!
on orders +$149, exclusions apply
Got Questions? We can help!
The BDS Suspension 2200H / 2200FS 3 inch lift kit is an great method to lift your Ford F250 / F350 to allow for use of up to 35 inch diameter tires. Built around heavy duty radius arms that use 1-3/4" OD -10GA DOM tubing with support gussets, these replacement arms are far superior to the factory stamped steel units. Featuring a high clearance design for extra ground clearance and are formed inward to allow for additional clearance of oversized tires. The arms correct the caster angle by bolting into the factory mounting points and reposition the front axle.
BDS Pro-Ride front coil springs lift the front end 3 inches while maintaining performance and ride quality. The front axle remains centered with the use a heavy duty adjustable track bar. Also included for the front suspension are a pair of sway bar relocation brackets.
In the rear a pair of 1 inch lift blocks along with e-coated extended u-bolts raise the back end.
Features and Benefits:
Premium Quality, Lifetime Warranty and Protection
BDS Suspension manufactures only premium quality suspension products. All are backed by a "No Fine Print" limited lifetime warranty. Guaranteeing all products to be free from defects in material and workmanship to the original retail purchaser. If you break it, they replace it...period.
Drivetrain Protection - BDS Suspension offers FREE 560Plus Factory Protection Plus. This supplemental drivetrain protection (5 years - 60,000 / 100,000 miles) on select vehicles gives you piece of mind with your purchase. Click here for more info
This kit includes the BDS ProRide Dual Rate Coil Springs. Designed to not only lift your vehicle, but also improve ride and overall performance. Featuring a softer intial spring rate over factory springs for a smooth on-road ride. The firm secondary rate gives more stability in harsh terrain.
Fox 2.0 Performance Series
Fox 2.0 Performance Series shocks are included in this kit or offered as an upgrade option. These awesome shocks feature a 2 inch clear anodized aluminum one-piece body. Designed as a gas mono-tube with an internal floating piston (IFP) that has application specific valving for great on and off-road performance.
Heavy Duty Radius Arms
Included are BDS high strength tubular radius arms. These replace the factory stamped arms to maintain properly front end geometry by correcting caster. Made from 1-3/4" OD heavy wall steel these arms are very strong ...and they look great!
|Important Notes1. Designed for use on diesel models, but can be installed on gas trucks. Will achieve additional 3/4" front ride height.|
2. Installation requires a torque wrench capable of 406 ft-lbs.
3. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
4.. Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section.
5. Trucks without top mounted overload spring will require (x4) UBT4031 ubolts available to purchase separately.
|Manufacturer Part Number||2200H / 2200FS|
|Product Line||Lift Kits|
|Lift Height||3 inch|
WARNING : Cancer and Reproductive Harm. www.p65warnings.ca.gov/