6" 2019-2024 Dodge Ram 1500 & Rebel 4wd (w/o air ride suspension) Lift Kit by Zone

This Zone D96 / D97 6 inch Suspension Lift Kit for the Ram 1500 4wd models will give your vehicle a great new look with the ability to fit up to 37 inch tires once installed. Featuring two heavy duty high clearance crossmembers that are locked together with a substantial differential skid plate. Replacement heavy duty steering knuckles and tie rod ends maintain correct steering geometry while front differential drop brackets minimize CV axle angles. Strut top spacers and pre-load spacer lift the front end 6 inches while keeping a quallity ride and handling. Also include for the front end is a billet aluminum front driveshaft spacer, sway bar relocatoin brackets, bump stop extensions, brake line relocation brackets and alignment cam hardware.

The rear is lifted with new Zone 5 inch coil springs to level the Ram 1500. Also included are track bar relocation brackets along with control arm relocation brackets, extended sway bar endlinks and bump stop extensions.  

Choose your rear shocks. Included are Zone Nitro Gas Shocks or upgrade to Fox 2.0 Adventure Series Shocks.

Top Features:

• 6 inch Front / 5 inch Rear
• Keep Factory Ride & Handling while Improving Performance
• High Clearance Heavy Duty Crossmembers
• Upper Strut Top Spacer
• Differential Skid Plate Included for Extra Protection
• CNC Machined Steering Knuckles
• Rear Shocks Included 
• Limited Lifetime Warranty
• 5 year / 100,000 Mile Drivetrain Warranty
• FMVSS no. 126 Certified by NHTSA
• Install Time: 8 Hours
• Difficulty Level 1-5: 3

• Will not fit adjustable air ride suspension equipped models
• Models with 22 inch factory wheels require the large bore knuckles due to larger wheel bearing assembly. Reference your vehicle's build code WPM or WPZ.
• Stock 17 inch wheels cannot be reinstalled due to steering interference. Stock 20 inch wheels can be reinstalled with factory tire size.
• If installing the 6" kit on a Rebel or truck with an "off road group package" the truck will sit about 1/2" front high with the preload spacer installed. If the preload spacer is not installed the truck will sit about 3/8" nose low
• Note: This lift kit is available to purchase without shocks, however extended shocks are required to install properly.