* Some items are excluded due to manufacturer restrictions. Tires, wheels, and leaf springs sold individually or in pairs are excluded. Only one coupon code may be applied per order. Coupon codes may not be combined with other discount codes or applied to prior orders. Coupon codes may or may not apply to sale items, depending on the item.
The BDS Suspension BDS1583FPE 4-inch premium Performance Elite coil-over suspension lift kit for the Ford F150 truck will allow for the fitment of up to 35-inch diameter tires for a great off-road look. Featuring Fox 2.5 Performance Elite series remote reservoir coilovers. These Fox 2.5 Coil-overs will enhance ride quality and handling in both on-road and off-road conditions.
This lift kit also features 1/4 inch thick steel laser cut high clearance cross members designed to give maximum clearance and provide a rock-solid mounting point for the factory lower control arms. A heavy-duty front skid plate connects the cross members while protecting steering and driveline components. Correct steering geometry is maintained using new ductile iron steering knuckles that keep the ESC system compatible. CV axle angles are kept at a minimum using a front differential relocation system.
The rear end is lifted using 3-inch tall axle blocks (replacing 1 1/4" factory blocks) with extended U-bolts. A 2-inch rear block is optional for a net 3/4-inch rear lift.
Rear shock options include the great performing Fox 2.0 Performance shocks or the 2.5 Performance Series Elite with DSC adjustments for ultimate performance and ride control.
Features and benefits:
Fox 2.5 Performance Elite coil-overs w/remote reservoir
DSC (dual speed compression) adjustable ride quality w/turn of a dial
1/4 Inch Steel High Clearance Cross members
Heavy Duty Front Skid Plate
High Clearance design for maximum clearance
Rear block replaces factory blocks
Ductile Iron Heavy Duty Steering Knuckles
Front Differential Relocation System
Allows use of up to 35-inch tires
Proudly made in the USA, using only premium quality components
Average Install Time: 8- hours
No Fine Print Lifetime Warranty
Factory Protection Plus
Fits 35x12.50 w/20x8 tires and 5.5-5.75" backspacing
Fits 295/60 w/20x9 tires and 4.5-5.75" backspacing
Fits 35x12.50 w/20x9 tires and 4.5-5.75" backspacing
*Trimming may be required*
All Possible SKUs Depending on Options Selected: BDS1583FPE, BDS1584FPE, BDS1902FPE, BDS1903FPE
Premium Quality, Lifetime Warranty and Protection
BDS Suspension manufactures only premium quality suspension products. All are backed by a "No Fine Print" limited lifetime warranty. Guaranteeing all products to be free from defects in material and workmanship to the original retail purchaser. If you break it, they replace it...period.
Drivetrain Protection - BDS Suspension offers FREE 560Plus Factory Protection Plus. This supplemental drivetrain protection (5 years - 60,000 / 100,000 miles) on select vehicles gives you peace of mind with your purchase. Click here for more info
Important: 3" Block kit recommended for a more level stance, 2" block kit will result in a tail low stance.
18" or larger diameter wheels required. Stock 17" and 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60R20 tire.
18" wheels with 5-5.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle/tie rod. 5.5" backspacing is highly recommended for tire to frame crash bar clearance.
Block kits replace factory 1-1/4" block. The stock block will not be reinstalled.
Crash bars may require modification based on wheel and tire choice. It is the end user's responsibility to ensure modifications are non-detrimental to vehicle safety.
Does NOT fit diesel models.
Will not work with Tremor models.
Some trucks with a 2-piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.
This system has not been tested on models equipped with Ford BlueCruise.
Will not work with models with CCD (Continuous Controlled Damping)