* Some items are excluded due to manufacturer restrictions. Leaf springs sold individually or in pairs are excluded. Only one coupon code may be applied per order. Coupon codes may not be combined with other discount codes or applied to prior orders. Coupon codes may or may not apply to sale items, depending on the item.
This Carli Suspension CS-D3-BC-CS-1319-D Backcountry 3.5 inch lift system for the Dodge Ram 3500 4wd diesel models is a premium lift kit that will lift your vehicle enough to fit up to 37 inch x 12.5 inch tires. It is perfect for Ram owners wanting the best ride quality during on-road, highway, towing/hauling along with slow to mid speed off road use.
Featured in this lift kit system are 3.5 inch lift front coil springs that have a slightly reduced linear rate for better ride comfort. Paired with the coil springs are Carli SPEC 2.0 remote reservoir shock absorbers. These shocks use a 2" diameter 6063 aluminum anodized body for corrosion resistance and great heat dispersion. Remote reservoirs will increase oil capacity, giving better heat dispersion and performance in extreme conditions. 5/8 inch diameter hardened steel chrome plated shafts are also used.
To keep the front axle centered properly an adjustable front track bar is included. In typical Carli fashion this bar has features that are not found in other track bars. This includes 3/8 inch DOM construction that allow for use of a 1" x 7/8" FK bearing heim joint with a huge 1" shank.
Radius arm drop brackets lower the factory radius arms which rotates the axle back to factory angles to maintain proper caster and geometry. Made from 1/4 inch cold rolled steel these heavy duty brackets will provide a solid link between the arms and chassis.
In the rear Carli gives you variety of choices to lift or not lift the rear of the vehicle. The base kit does not lift the rear, however for a level ride you will want to choose between the Carli progressive rate 2" lift add-a-pack kit (most economical and maintains factory payload) or the Carli progressive rate 2" lift leaf springs. The progressive leaf springs will provide increased suspension travel and drastically improved ride quality while reducing load capacity to a 3/4 ton spec. You can make your selection in the options section below.
Features & Benefits:
3.25 to 3.5 inch front lift (depending on cab configuration) / 0 to 2.5 inch rear lift
Premium lift kit optimized for on-road road quality, towing and slow to mid speed off-roading
Front linear rate coil springs - with reduced linear rate to improve ride quality
Carli SPEC 2.0 Remote Resi Front and Rear Shocks - 2" diameter aluminum body with remote reservoir
Shocks are fully serviceable and rebuild-able
Remote reservoir increases oil capacity for better heat management and better overall performance
Adjustable track bar - keeps front axle centered and dampens vibrations. Uses FK heim joint with huge 1" shank
Radius arm drop brackets keep proper front caster
Rear lift is optional, but Carli progressive 2" lift leaf springs are highly recommended for ride quality and a level ride (see in options below)
Front Travel = 9.5" / Rear Travel = 11.3" (50% more suspension travel than stock)
Lifetime warranty on components, 1 year warranty on shocks
AS-D3SPKG-CS20RR-A: Carli SPEC 2.0 Resi Shocks, Front and Rear, Reservoir Mounts
Optional Upgrades - While not required, Carli Suspension offers additional components to further enhance ride quality and / or performance of this leveling system. These can be found by scrolling down the page to the table below.
Required Sway Bar Selection - While Carli does not include a front sway bar correction in this kit it is required to install this lift kit properly. The billet aluminum drop bracket kit works great as a more economical solution. However, for truck owners wanting a HUGE improvement in ride quality the Carli Torsion Sway Bar is your solution and is an amazing upgrade. Designed to allow the front suspension to move more freely without giving up control.
Important Notes1. Does not work with rear auto-level air suspension.
2. Fits with diesel engine only
3. While Carli does not include a front sway bar correction in this kit it is required to install this lift kit properly (see options below)
Carli's solid billet aluminum Sway Bar Drops are designed to return your lifted vehicle's sway bar to factory angles. Crafted using cutting-edge machining technology, these drops guarantee precise alignment of your Sway Bar and also create sufficient space for coil clearance.
Constructed out of solid machined billet aluminum
Designed for factory sway bar
Hard-anodized construction for corrosion resistance
Eliminate binding that can occur when sway bar is not properly dropped on lifted models
Read More
Carli's solid billet aluminum Sway Bar Drops are designed to return your lifted vehicle's sway bar to factory angles. Crafted using cutting-edge machining technology, these drops guarantee precise alignment of your Sway Bar and also create sufficient space for coil clearance.
Constructed out of solid machined billet aluminum
Designed for factory sway bar
Hard-anodized construction for corrosion resistance
Eliminate binding that can occur when sway bar is not properly dropped on lifted models
For optimal ride quality, the Torsion Sway Bar is a great choice. This enhanced sway bar effectively reduces the front sway bar's spring rate, resulting in a ride experience akin to independent suspension.
Easily the best "bang for the buck" upgrade for ride quality
Allows front suspension to move freely without giving up control
Read More
For optimal ride quality, the Torsion Sway Bar is a great choice. This enhanced sway bar effectively reduces the front sway bar's spring rate, resulting in a ride experience akin to independent suspension.
Easily the best "bang for the buck" upgrade for ride quality
Allows front suspension to move freely without giving up control
These Cali Suspension Premium CS-DPAP3-19-4.25 5-leaf Progressive Add A Pack Kit for the Dodge Ram 3500 is designed to enhance both performance and comfort. By replacing the lower overload leaf with 5 thinner gauge springs, Carli have maintained the factory load capacity while significantly improving mobility.
Replaces lower overload spring
More predictability and spring progression keeps tires planted
Includes U-Bolts and Center Pins
1" block included to match Carli's 3" suspension systems
Provides 2"-2.5" total lift
Read More
These Cali Suspension Premium CS-DPAP3-19-4.25 5-leaf Progressive Add A Pack Kit for the Dodge Ram 3500 is designed to enhance both performance and comfort. By replacing the lower overload leaf with 5 thinner gauge springs, Carli have maintained the factory load capacity while significantly improving mobility.
Replaces lower overload spring
More predictability and spring progression keeps tires planted
Includes U-Bolts and Center Pins
1" block included to match Carli's 3" suspension systems
The Carli shackle is constructed of 1/4″ American cold-rolled steel. The mid-length gusset ensures no deflection while the serviceable bushings offer a far superior ride to the bind of the factory bushings.
Greasable and Rebuildable
Far Better Ride than Factory Shackle
1/4" Steel Construction
Fits Factory and Carli Springs
Read More
The Carli shackle is constructed of 1/4″ American cold-rolled steel. The mid-length gusset ensures no deflection while the serviceable bushings offer a far superior ride to the bind of the factory bushings.
Restores Factory capacity to reduced rate Carli Leaf Springs. Provides the best of both ends of the spectrum - ride on Carli's soft-rate leaf springs when unloaded then air the bags up to level the chassis and support your load!
Restore Factory Payload to Carli Full Progressive Springs
Supports up to 12 inches of travel
Compatible with 1"-2" Rear Lift
Includes 1/4" Airline, Fittings and Schrader Valves
Adjustable Rear Loaded height, 2,000lb Capacity per bag at 100psi
Read More
Restores Factory capacity to reduced rate Carli Leaf Springs. Provides the best of both ends of the spectrum - ride on Carli's soft-rate leaf springs when unloaded then air the bags up to level the chassis and support your load!
Restore Factory Payload to Carli Full Progressive Springs
Supports up to 12 inches of travel
Compatible with 1"-2" Rear Lift
Includes 1/4" Airline, Fittings and Schrader Valves
Adjustable Rear Loaded height, 2,000lb Capacity per bag at 100psi
This bolt-on replacement for the factory stabilizer is adjustable ranging from 70 to 200 psi, allowing you to achieve a neutral steering feel at 70 psi or counter the natural left-hand pull often associated with tires like Nitto Trail Grapplers at 200 psi. For those seeking the pinnacle of steering control, consider pairing it with the Carli High Mount for the ultimate dual, opposing steering stabilizer setup that offers infinite adjust-ability.
Direct bolt-in replacement
Corrects left tire pull, adjustable
Read More
This bolt-on replacement for the factory stabilizer is adjustable ranging from 70 to 200 psi, allowing you to achieve a neutral steering feel at 70 psi or counter the natural left-hand pull often associated with tires like Nitto Trail Grapplers at 200 psi. For those seeking the pinnacle of steering control, consider pairing it with the Carli High Mount for the ultimate dual, opposing steering stabilizer setup that offers infinite adjust-ability.
This is a bolt-in companion to the Carli Low-Mount Steering Stabilizer. With an adjustable range from 70 to 200 psi, it allows you to achieve a neutral steering response at 70 psi or counteract the natural right-hand pull typically associated with tires like Toyo Mud Terrains at 200 psi. Please note that this is not a primary stabilizer and must be used in conjunction with either a Carli or OEM lower stabilizer in the factory location for optimal performance.
Simple, Bolt-in Installation
Corrects right tire pull, adjustable
Combines with Low-Mount for opposing stabilization
Read More
This is a bolt-in companion to the Carli Low-Mount Steering Stabilizer. With an adjustable range from 70 to 200 psi, it allows you to achieve a neutral steering response at 70 psi or counteract the natural right-hand pull typically associated with tires like Toyo Mud Terrains at 200 psi. Please note that this is not a primary stabilizer and must be used in conjunction with either a Carli or OEM lower stabilizer in the factory location for optimal performance.
Simple, Bolt-in Installation
Corrects right tire pull, adjustable
Combines with Low-Mount for opposing stabilization
These heavy duty radius arms are a huge strength improvement over factory arm. Featuring 17-4 Stainless Spherical Joints that eliminates the factory bushings that have the kinetic “kick” as they wind up with energy.
12" Quad Wrap Limit Straps, For 3.25" Lift Systems
Read More
These heavy duty radius arms are a huge strength improvement over factory arm. Featuring 17-4 Stainless Spherical Joints that eliminates the factory bushings that have the kinetic “kick” as they wind up with energy.